Flowchem VE Honeycomb C Board System

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Flowchem VE Honeycomb C is an insulating, extruded polypropylene honeycombed board with conductive polyester non-woven fabric faces, to be used only in conjunction with the Flowchem VE GL vinyl ester resin lining. High performance (HP) grade available for heavy traffic conditions.

Used for isolation from concrete and masonry structures prior to the application of a glass fibre reinforced lining system, which will provide resistance to continuous or occasional exposure from heavy duty chemical, thermal and mechanical attack.

  • Insulation and isolation from existing structure
  • Low electrically resistant surface - spark testing
  • Provides sound platform for the Flowchem VE GL
  • No surface preparation or repair required
  • Bridges cracks and movement joints
  • Tolerant of damp or wet conditions
  • Leak detection and drainage benefits
  • Suitable for new construction and renovation
Platform Compatible Version Certified to
IFC IFC 2X3 1 1.3
Revit Revit 2016 + 2 2.0

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

IFC
IfcExportAs
IfcCoveringType
IfcExportType
USERDEFINED
COBie
NBS_General
NBS_Data
Adhesion
Coating: >4 MPa (substrate failure)
BarcolHardness
Coating: >50
CoatingsLevellingCoat
n/a
CoatingsProtectiveCoat
3 mm Flowchem VE GL
CoatingsProtectiveTreatment
n/a
CompressiveStrength
Board: 13 Mpa, Coating: 160 MPa
Density
Board: 80 kg/m², Coating: 1.01
ElectricalConductance
Board: 3.5 kilohms/cm²
EModulus
Board: 15 Mpa, Coating: 3.1 GPa
FlexuralStrength
Coating: 125 MPa
ProtectiveBoard
Honeycomb C: 2500 x 1200 x 10 mm
SamplesRequired
n/a
ShearModulus
Board: 8 MPa
ShearStrength
Board: 0.5 MPa
Shrinkage
Coating: <>
TemperatureResistance
Board: Softening point 125°C, Coating: <>
TensileStrength
Board (perpendiular): 0.5 MPa, Coating: 73 MPa
Pset_CoveringCommon

More BIM objects

What's Changed?

7/5/2018

Object upgraded to NBS BIM Object Standard v2.0.