Can't find a BIM Object?
Tell us who you would like to see BIM objects from or what objects you would like to see.
NBS Plug-in for Autodesk® Revit® v3.12 update is available. Learn more
Fire detection and alarm systems consist of control and indicating equipment, detection devices, manual call points, and visual/ audible alarms.
Showing objects most relevant to your location first.
Single Loop Fire Alarm Control Panel.
The new Go series is an evolution for non-networked single-loop fire alarm systems.
The new Go series is an evolution for non-networked single-loop fire alarm systems.
1-4 Loop Fire Alarm Control Panel.
1-2 Loop Fire Alarm Control Panel.
2-8 Loop Fire Alarm Control Panel.
Multi-Sensor fire alarm. 230V with ten year rechargeable lithium back-up. AudioLINK. SmartLINK upgradeable.
RadioLINK fire/ CO alarm Interface.
Heat alarm. 230V with ten year rechargeable lithium back-up. AudioLINK. SmartLINK upgradeable.
RadioLINK Alarm Controller. Ten year lithium battery. Fire and CO indicators.
Carbon monoxide (CO) alarm. Lithium battery powered. AudioLINK.
RadioLINK carbon monoxide (CO) alarm. Lithium battery powered. AudioLINK.
Optical smoke alarm. 230V with ten year rechargeable lithium back-up. AudioLINK. SmartLINK upgradeable.
A powerful, flexible, single-loop fire panel.
A powerful, flexible, single-loop fire panel.
Optical smoke alarm. 230V with alkaline battery back-up. Easi-fit base.
Disabled alarm system with pull cord, essential for every public accessible washroom available in white plastic or stainless steel.
Carbon monoxide (CO) alarm. 230V with ten year rechargeable lithium back-up. AudioLINK. SmartLINK upgradeable.
Multi-sensor heat & CO alarm. 230V with ten year rechargeable lithium back-up. AudioLINK. SmartLINK upgradeable.
16-32 Zone Conventional Fire Panel.
The Advanced 1.5A, 3.0A and 5.0A power supply units can be used for any fire alarm system which specifies EN54-4 power supply equipment.
Intelligent addressable Emergency Lighting Control System.
An addressable heat detector ideal for naturally smokey or dirty environments. A classified CS device that will report an alarm at 90°C.
RadioLINK base. 230V with ten year+ rechargeable back-up. For use with 140RC series alarms.
An addressable heat detector ideal for naturally smokey or dirty environments. A classified A2S device that will report an alarm at 55°C.
A Visual Alarm Device (VAD) with an EN54-23 category of C-3-15. It can be mounted using the Apollo first fix base. The VAD uses a high intensity LED to produce a white flash colour.
A Visual Alarm Device (VAD) with an EN54-23 category of C-3-8.5. It can be mounted using the Apollo first fix base. The VAD uses a high intensity LED to produce a white flash colour.
A Visual Alarm Device (VAD) with an EN54-23 category of W-2.5-7. It can be mounted using the Apollo first fix base. The VAD uses a high intensity LED to produce a white flash colour.
The MiniDisc Remote Indicator is a light-weight, compact, red LED indicator for use in fire protection systems.
An addressable Multisensor detector combining an optical smoke sensor and thermistor temperature sensor to detector fire. Sensitive to a wide range of fires.
Intelligent analogue addressable multisensor detector with 5 sensitivity mode settings and responds well to both smouldering and flaming fires.
Your query has been sent.
A technical consultant from will be in touch soon.
Manufacturers using NBS National BIM Library adhere to our code of conduct.
OmniClass
The creation of BIM objects for the inclusion on the National BIM Library includes Omniclass classification codes and titles.
Copyright © 2014 the secretariat for the OmniClass Development Committee. All Rights Reserved. http://www.omniclass.org/