4HR UPS - CCTV power supply

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

The 4HR UPS™ Range provides extended standby power to critical security applications such as PoE and PoC CCTV systems.

When used with the recommended standby batteries the devices will provide approximately 4 hours standby time for the camera system in the event of a mains failure.

All models are housed within a standard 4U 19" rack enclosure and providing a true sine wave 220Vac output for the powered devices.

LED status indication allows quick system diagnosis on the front panel. Volt-free fault outputs are available on the rear panel for remote signalling if required.
This range offers the installer a simple ‘plug and play’ UPS installation, utilising industry standard batteries and enclosures.

Features and benefits:

  • 8, 16, 32 camera versions available.
  • LED indication (mains present, output health, standby mode operation).
  • Mains Loss - Volt-free fault output.
  • Temperature compensated battery charging.
  • Mains input 264V ac.
  • Single IEC 220Vac outlet socket.
  • Single IEC mains input (2m power cord provided).
  • Can accommodate 2 x 12V 18Ah batteries (8CAM version).
  • Floor standing battery enclosure with 3m battery lead for either 2 x 12V 38Ah (16CAM) or 2 x 12V 65Ah (32CAM).
  • Option to increase standby time by fitting 2 extra 12V 18Ah batteries (16CAM and 32CAM).
Platform Compatible Version Certified to
IFC IFC - 1 2.0
Revit Revit 2017 + 1 2.0

  • Properties and values
  • More BIM objects

Properties and values

IFC
IfcExportAs
IfcElectricFlowStorageDeviceType
IfcExportType
BATTERY
COBie
BOS_General
NBS_Data
BatteriesBatteryRechargeTimeTo100Capacity
Within eight hours
BatteriesFusedParallelBatteryStringsQuantityMinimum
Two
BatteriesVoltage
12 V
InverterOutputNominalVoltage
220 V a.c
NominalDepth
440

More BIM objects