Verified by manufacturer 3 months ago
Framed turnstile
DORMA revolving door KTV 4 (upper door drive KT FLEX Direct).
Suitable for optimization of the building energy balance and provides efficient noise protection.
DORMA revolving door KTV 4 (upper door drive KT FLEX Direct).
Features and benefits:
Material | Glass Aluminium |
Shape | Circle |
Uniclass | |
CAWS | L20/55 Doorsets L20/495 Automatic revolving doors |
Standard | To DIN 18650-1 and DIN 18650-2. |
Configuration | Design with pivot-mounted wings (book fold).Guidance for specification option: The four pivot-mounted wings (book fold) option is in accordance with AutSchR (Automatic Sliding Doors on Escape and Rescue Routes):1997, suitable for use in emergency routes when in escape position (when unlocked). Rigid turnstile.Rigid turnstile, with one leaf foldable.Guidance for specification option: For transportation and ventilation purposes. |
Materials and finishes | |
Doors | RAL colour.Guidance for specification option: Insert requirements. Stainless steel 1.4301 grade, grain 240.Silver colour, anodized E6/C0.Special colour.Guidance for specification option: Insert requirements. |
Drum walls | Extruded aluminium profiles with laminated safety glass 8.76 mm clear.Extruded aluminium profiles with aluminium paneling.Guidance for specification option: 2 x 2 mm aluminium sheet with interior insulation. Manufacturer guidanceCircular curved drum walls made of extruded aluminium profiles. 70 x 46 mm entrance posts to mount the operating elements. Top and bottom profiles with 100 x 26 mm visible width. |
Glazing | |
Type | 8 mm laminated safety glass.10 mm laminated safety glass.6 mm toughened safety glass.8 mm toughened safety glass.10 mm toughened safety glass. |
Activation and control system | |
Type | KTV-A (automatic).Guidance for specification option: Fully automatic door drive with microprocessor control. Standard door system activation using motion sensors. Rotational speed is adjustable to any level. Lock: The door moves to the locking position at positioning speed and stops there. Lighting (optional accessory) is switched off automatically. Adjustable door functions using program switch:
KTV-P (positioning automatic).Guidance for specification option: For manual door operation in two operation modes:
KTV-S (servomatic).Guidance for specification option: Electromagnetic direct drive with two functions selectable using program switch:
|
Safety devices | Safety equipment in accordance with DIN 18650 for KTV A.Guidance for specification option: Only with ID >3000 mm. Consisting of safety sensors (canopy), rubber strip collision protection (posts, vertical), safety contact strips (bottom of door wing, horizontal), safety contact strips (side of door wing, vertical), emergency-stop-switches inside and outside, safety switch (book fold wings only), safety sensors top of door wing, horizontal. Safety equipment for KTV P/S in accordance with DIN 18650/EN 16005 consisting of rubber strips collision protection (posts - vertical) low-energy drive.Guidance for specification option: Force <80 N. |
Locking mechanism | None.With mechanical rod locking mechanism, locking rod in wing, locking plate in lower ceiling.With electromechanical bolt-locking device on wings closed when currentless.Guidance for specification option: For KTV A only. With manual floor-locking device for on-site profile half-cylinders. |
Accessories | None.Bolt contact (potential-free).Button (symbol: wheelchair) inside and outside.Guidance for specification option: To reduce the door speed to approx. 2 RPM for one door revolution. Door status and locking notification.Emergency power supply UPS.Guidance for specification option: Not suitable for escape routes. Error message to building control system.Four pieces push handles OGRO TG 9355, D 32 mm mounted horizontally on entire door wing width.Four pieces push handles OGRO TG 9355, D 40 mm mounted vertically on entire door wing height.Four pieces push handles OGRO TG 9356, D 32 mm mounted vertically on door wing; length: 350 mm.Isolation stainless steel sheet 360° for floor ring.Night bank function. |
Ceiling structure | Base structure made of extruded aluminium profile, covered with aluminium sheeting colour-matched to the door system. |
Upper ceiling interior | With particleboard dust cover, melamine-coated white. With optical sheet metal cover, colour-matched to the system. |
Upper ceiling exterior | Upper ceiling exterior rain-proof prepared with aluminium clamping flange to mount an on-site foil. Upper ceiling exterior rain-proof with cover panel colour-matched to the system and additional ceiling edge profile to mount two piece stainless steel water spouts. Guidance for specification option: Internal diameter of 3200 mm, max. Upper ceiling exterior with particleboard dust cover, melamine-coated white. Upper ceiling exterior with optical sheet metal cover, colour-matched to the system. |
Lower ceiling | Lower ceiling made of aluminium base structure with inlaid 8 mm particleboard melamine-white. Lower ceiling made of aluminium base structure with inlaid 2 mm aluminium sheet, surface finish___. Guidance for specification option: Colour-matched to the system or freely selectable. Manufacturer guidanceSegmented into eight removable ceiling panels. |
Night shield | Not required. Manual exterior aluminium profile with laminated safety glass. Guidance for specification option: With night shield manual exterior continuous made of circular curved extruded aluminium profile with laminated safety glass filling 8.76 mm. 70 x 46 mm entrance posts. Top and bottom profiles with 100 mm visible width. Locking device using manual bar lock on top and bottom, set up for on-site profile half-cylinder. Manual exterior aluminium profile with aluminium paneling. Guidance for specification option: With night shield manual exterior continuous made of circular curved extruded aluminium profile and 18 mm thick panel filling of 2 x 2 mm aluminium sheet with insulation between panels. 70 x 46 mm entrance posts. Top and bottom profiles with 100 mm visible width. Locking device using manual bar lock on top and bottom, set up for on-site profile half-cylinder. Manual interior aluminium profile with laminated safety glass. Guidance for specification option: With night shield manual interior continuous made of circular curved extruded aluminium profile with laminated safety glass filling 8.76 mm clear. 70 x 46 mm entrance posts. Top and bottom profiles with 100 mm visible width. Locking device using manual bar lock on top and bottom, set up for on-site profile half-cylinder. Manual interior aluminium profile with aluminium paneling. Guidance for specification option: With night shield manual interior continuous made of circular curved extruded aluminium profile and 18 mm thick panel filling of 2 x 2 mm aluminium sheet with insulation between panels. 70 x 46 mm entrance posts. Top and bottom profiles with 100 mm visible width. Locking device using manual bar lock. Manufacturer guidanceSee 'Options' below and insert requirements. |
Floor ring | Not required. Guidance for specification option: Installation on finished floor. With floor ring. Guidance for specification option: Stainless steel angle 40 x 40 x 4, 360°, with adjustable base structure 80–250 mm – Underfloor 230 mm (SSL - FFL). Type 0. Guidance for specification option: Floor ring without clamping flange to attach an on-site floor sealing. Type 1. Guidance for specification option: Floor ring with axial clamping flange to attach an on-site floor sealing. Type 2. Guidance for specification option: Floor ring with 180° exterior clamping flange to attach an on-site floor sealing. Manufacturer guidanceFloor ring serves simultaneously to attach the floor finish. Sealing work required for the building structure must be performed by an on-site specialist company. The empty space between structural slab level (SSL) and lower-edge of the finished floor must be filled in with floor screed on-site. |
Floor finish | On-site floor finish (30 mm thick, maximum). Floor mat made by EMCO, Type Diplomat 522/3R, anthracite colour. Floor mat made by EMCO, Type Diplomat 522/3G, black colour. Floor mat made by ARWEI, Type 020/72N, anthracite colour. Floor mat made by ARWEI, Type 020/72G, black colour. |
Facade connection | On-site. Panel in centre axle. Guidance for specification option: Three-sided, 24 mm thick, maximum 100 mm wide. Special design. |
Lighting | Four recessed LED spotlights. Eight recessed LED spotlights. |
Program switch | Not required. Electronic program switch for revolving door. Guidance for specification option: For KTV A only. Key switch for revolving door. Guidance for specification option: For KTV A only. |
Warm-air curtain | Electric floor-mounted device. Guidance for specification option: Colour-matched to the system. Set up for on-site electrical connection. Electric warm-air curtain. Guidance for specification option: To go on top of upper ceiling with exhaust duct in the radius of the system in the interior entrance area. Surface exhaust duct colour-matched to the system. Warm-air curtain set up for on-site electrical connection. Floor-mounted device. Guidance for specification option: Colour-matched to the system. Warm-air curtain set up for on-site hot-water connection. Warm-air curtain. Guidance for specification option: To go on top of upper ceiling with exhaust duct in the radius of the system in the interior entrance area. Surface exhaust duct colour-matched to the system. Warm-air curtain set up for on-site hot-water connection PWW 70/50°C. |
Ramming protection | None. Glass separating. Not glass separating. Ramming protection: Side-wall glazing with 84 mm wide ramming protection made of aluminium sheet colour-matched to the system. Side-wall glazing with 200 mm wide ramming protection made of aluminium sheet colour-matched to the system. |
Capacity | Guidance for specification option: Traffic capacity: Varies depending on internal diameter size, consult technical literature for details. |
Dimensions | Manufacturer guidanceInsert requirements or refer to drawing or schedule.
|
Frame | 80 mm x 60 mm aluminium specialized frame profiles with horizontal and vertical brush seal. |
Platform | Compatible | Version |
---|---|---|
- | 1 |