KTV 3 Direct Drive - Automatic
Verified by manufacturer 2 months ago
Framed turnstile
Framed turnstile
Automatic three wing revolving door.
Description
KTV 3 revolving door with a rigid three-wing turnstile. Upper door drive KT FLEX Direct, installed between upper and lower ceiling, gearless and low-wear direct drive without drive belts or sprockets with electromagnetic operating principle, ceiling height in the base version just 100 mm, functional manual door, door can be upgraded with functional modules ranging from positioning or servo features up to creating fully automatic door with microprocessor controller using modular features.
Manufactured and TÜV type approval in accordance with DIN 18650-1, -2; machine guideline 2006/42/EC; the guidelines for power-operated windows, doors, and gates, ASR A1.7; EN ISO 13849-1; low-voltage guideline 2006/95/EC with EN 60335-1, each in their newest versions.
Features and benefits:
- Easy installation and rapid commissioning.
- State-of-the-art design and compliance with regulations.
- Helps with optimization of the building energy balance.
- Provides efficient noise protection.
- Tailored integrated application combining industrial engineering precision and assured quality.
- Glazed drum walls or with metal panelling.
- Additional curved sliding doors in front of the entrance to act as night shields.
- Low-energy positioning automatic drive system (KTV P).
- Low-energy servomatic drive system (KTV S).
- Full-energy automatic operation drive system (KTV A).
- Accessories that ensure compliance with the requirements of DIN 18650 and EN 16005 and a variety of other accessories and options.
- Traffic capacity varies depending on internal diameter size, consult technical literature for details
General information
Material | Aluminium Glass |
Width | Manufacturer guidanceInternal diameter: 2000–3800 mm (all dimensions possible in-between). |
Height | Manufacturer guidance
|
Uniclass | |
CAWS | L20/55 Doorsets L20/495 Automatic revolving doors |
Specification data - Automatic revolving doorsets
Configuration | Design with pivot-mounted wings (book fold).Guidance for specification option: The three pivot-mounted wings (book fold) option is in accordance with AutSchR (Automatic Sliding Doors on Escape and Rescue Routes):1997, suitable for use in emergency routes when in escape position (when unlocked). Rigid turnstile.Rigid turnstile, with one leaf foldable.Guidance for specification option: For transportation and ventilation purposes. |
Materials and finishes | |
Doors | RAL colour.Guidance for specification option: Insert requirements. Stainless steel 1.4301 grade, grain 240.Silver colour, anodized E6/C0.Special colour.Guidance for specification option: Insert requirements. |
Drum walls | Extruded aluminium profiles with laminated safety glass 8.76 mm clear.Extruded aluminium profiles with aluminium paneling.Guidance for specification option: 2 x 2 mm aluminium sheet with interior insulation. Manufacturer guidanceCircular curved drum walls made of extruded aluminium profiles. 70 x 46 mm entrance posts to mount the operating elements. Top and bottom profiles with 100 x 26 mm visible width. Sidewalls prepared for attachment to the building facade 24 mm thick. |
Glazing | |
Type | 8 mm laminated safety glass.10 mm laminated safety glass.6 mm toughened safety glass.8 mm toughened safety glass.10 mm toughened safety glass. |
Activation and control system | |
Type | KTV-A (automatic).Guidance for specification option: Fully automatic door drive with microprocessor control. Standard door system activation using motion sensors. Rotational speed is adjustable to any level. Lock: The door moves to the locking position at positioning speed and stops there. Lighting (optional accessory) is switched off automatically. Adjustable door functions using program switch:
KTV-P (positioning automatic).Guidance for specification option: For manual door operation in two operation modes:
KTV-S (servomatic).Guidance for specification option: Electromagnetic direct drive with two functions selectable using program switch:
|
Safety devices | Not required.Guidance for specification option: Only KTV M with speed limitation. Safety equipment in accordance with DIN 18650 for KTV A.Guidance for specification option: Only with ID >3000 mm. Consisting of safety sensors (canopy), rubber strip collision protection (posts, vertical), safety contact strips (bottom of door wing, horizontal), safety contact strips (side of door wing, vertical), emergency-stop-switches inside and outside, safety switch (book fold wings only), safety sensors top of door wing, horizontal. Safety equipment for KTV P/S.Guidance for specification option: In accordance with DIN 18650/EN 16005 consisting of rubber strips collision protection (posts - vertical) low-energy drive. Force <80 N. |
Locking mechanism | None.With mechanical rod locking mechanism, locking rod in wing, locking plate in lower ceiling.With electromechanical bolt-locking device on wings closed when currentless.Guidance for specification option: For KTV A. With manual floor-locking device for on-site profile half-cylinders. |
Accessories | None.Bolt contact (potential-free).Button (symbol: wheelchair) inside and outside.Guidance for specification option: To reduce the door speed to approx. 2 RPM for one door revolution. Door status and locking notification.Emergency power supply UPS.Guidance for specification option: Not suitable for escape routes. Error message to building control system.Four pieces push handles OGRO TG 9355, D 32 mm mounted horizontally on entire door wing width.Four pieces push handles OGRO TG 9355, D 40 mm mounted vertically on entire door wing height.Four pieces push handles OGRO TG 9356, D 32 mm mounted vertically on door wing; length: 350 mm.Isolation stainless steel sheet 360° for floor ring.Night bank function. |
Night shield | Not required. Manual, external, framed glass. Guidance for specification option: With night shield manual exterior continuous made of circular curved extruded aluminium profile with laminated safety glass filling 8.76 mm. 70 x 46 mm entrance posts. Top and bottom profiles with 100 mm visible width. Locking device using manual bar lock on top and bottom, set up for on-site profile half-cylinder. Manual, external, metal panelling. Guidance for specification option: With night shield manual exterior continuous made of circular curved extruded aluminium profile and 18 mm thick panel filling of 2 x 2 mm aluminium sheet with insulation between panels. 70 x 46 mm entrance posts. Top and bottom profiles with 100 mm visible width. Locking device using manual bar lock on top and bottom, set up for on-site profile half-cylinder. Manual, internal, framed glass. Guidance for specification option: With night shield manual interior continuous made of circular curved extruded aluminium profile with laminated safety glass filling 8.76 mm clear. 70 x 46 mm entrance posts. Top and bottom profiles with 100 mm visible width. Locking device using manual bar lock on top and bottom, set up for on-site profile half-cylinder. Manual, internal, metal paneling. Guidance for specification option: With night shield manual interior continuous made of circular curved extruded aluminium profile and 18 mm thick panel filling of 2 x 2 mm aluminium sheet with insulation between panels. 70 x 46 mm entrance posts. Top and bottom profiles with 100 mm visible width. Locking device using manual bar lock. Manufacturer guidanceSee 'Options' below and insert requirements. |
Floor ring | Not required. Guidance for specification option: Installation on finished floor. With floor ring: Stainless steel angle 40 x 40 x 4, 360°. Guidance for specification option: With adjustable base structure 80–250 mm – Underfloor 230 mm (SSL - FFL). Type 0. Guidance for specification option: Floor ring without clamping flange to attach an on-site floor sealing. Type 1. Guidance for specification option: Floor ring with axial clamping flange to attach an on-site floor sealing. Type 2. Guidance for specification option: Floor ring with 180° exterior clamping flange to attach an on-site floor sealing. Manufacturer guidanceFloor ring serves simultaneously to attach the floor finish. Sealing work required for the building structure must be performed by an on-site specialist company. The empty space between structural slab level (SSL) and lower-edge of the finished floor must be filled in with floor screed on-site. |
Floor finish | On-site floor finish (30 mm thick, maximum). Floor mat made by EMCO, Type Diplomat 522/3R, anthracite colour. Floor mat made by EMCO, Type Diplomat 522/3G, black colour. Floor mat made by ARWEI, Type 020/72N, anthracite colour. Floor mat made by ARWEI, Type 020/72G, black colour. |
Facade connection | On-site. Panel in centre axle. Guidance for specification option: Three-sided, 24 mm thick, maximum 100 mm wide. Special design. |
Lighting | Four recessed LED spotlights. Eight recessed LED spotlights. |
Program switch | Not required. Electronic program switch for revolving door. Guidance for specification option: For KTV A only. Key switch for revolving door. Guidance for specification option: For KTV A only. |
Warm-air curtain | Electric floor-mounted device. Guidance for specification option: Colour-matched to the system. Set up for on-site electrical connection. Electric warm-air curtain. Guidance for specification option: To go on top of upper ceiling with exhaust duct in the radius of the system in the interior entrance area. Surface exhaust duct colour-matched to the system. Warm-air curtain set up for on-site electrical connection. Floor-mounted device. Guidance for specification option: Colour-matched to the system. Warm-air curtain set up for on-site hot-water connection. Warm-air curtain. Guidance for specification option: To go on top of upper ceiling with exhaust duct in the radius of the system in the interior entrance area. Surface exhaust duct colour-matched to the system. Warm-air curtain set up for on-site hot-water connection PWW 70/50°C. |
Ramming protection | None. Glass separating. Not glass separating. Ramming protection: Side-wall glazing with 84 mm wide ramming protection made of aluminium sheet colour-matched to the system. Side-wall glazing with 200 mm wide ramming protection made of aluminium sheet colour-matched to the system. |
Dimensions | As drawing. Guidance for specification option: Insert reference. Manufacturer guidance
|
Upper ceiling interior | With particleboard dust cover, melamine-coated white. With optical sheet metal cover, colour-matched to the system. |
Upper ceiling exterior | Upper ceiling exterior rain-proof prepared with aluminium clamping flange to mount an on-site foil. Upper ceiling exterior rain-proof with cover panel colour-matched to the system and additional ceiling edge profile to mount two piece stainless steel water spouts. Guidance for specification option: Internal diameter of 3200 mm (maximum). Upper ceiling exterior with particleboard dust cover, melamine-coated white. Upper ceiling exterior with optical sheet metal cover, colour-matched to the system. |
Lower ceiling | Lower ceiling made of aluminium base structure with inlaid 8 mm particleboard melamine-white. Lower ceiling made of aluminium base structure with inlaid 2 mm aluminium sheet, surface finish___. Guidance for specification option: Colour-matched to the system or freely selectable. Manufacturer guidanceSegmented into eight removable ceiling panels. |
Frame | 80 mm x 60 mm aluminium specialized frame profiles with horizontal and vertical brush seals. |
BIM objects
| Platform | Compatible | Version |
|---|---|---|
 Revit | - | 1 |
Literature
DORMA KTC-3 KTC-4 - Revolving Doors Comfortline