NBS Source
I'm a manufacturer

Koster NB1 - Crystallization Active Slurry Mortar

Verified by manufacturer 4 months ago

Delta Membrane Systems Ltd

Mineral coating containing crystallizing and capillary-plugging agents.

Jump to:
BOS
+44 (0)1992 523523 Website

Application

  • Waterproofing against ground moisture, non-pressurized and pressurized water.
  • New building and in the repair for horizontal and vertical waterproofing of concrete, masonry or cementitious plaster in wet rooms, bathrooms, showers, new-built basements, tanks, silos, sewage treatment plants, manholes, drinking water tanks, etc.
  • Application should only be carried out on substrates that are free from moving cracks.

Description

Mineral coating containing crystallizing and capillary-plugging agents.


Features and benefits:

  • Excellent resistance to pressure, abrasion and chemicals.
  • Highly effective waterproofing with bituminous building materials.

General information

Color

Grey

Material

Cement

Guidance for specification option:

Cementitous slurry.

Warranty description

Ten year

Uniclass

Pr_20_31_53_18 Crystallization active slurry mortarsPrimary

CAWS

J10/130 Proprietary crystallization active mortar

Specification data - Crystallization active slurry mortars

Additive

Not required.

Köster NB 1 Flex.

Guidance for specification option:

  • A latex based dispersion which is intended as a mixing liquid for Köster NB sealing slurries.
  • It has an elastifying effect, improves the adhesion to the substrate and prevents the premature drying out of the fresh slurry.

Köster SB-Bonding Emulsion.

Guidance for specification option:

  • Added to the mixing water to raise the ability of the waterproofing system to retain water.
  • Prevents, in cases of unfavourable weather conditions (warm, dry, drought), a premature curing of the coating.
  • Introduces flexibility to the material.


Coating system

-

Manufacturer guidance

Minimum two coats.

Consumption (per layer applied)

-

Manufacturer guidance

  • Positive side waterproofing: 1.5 kg/m² (minimum, one coat); 4 kg/m² (maximum, 2–3 coats).
  • Negative side waterproofing: 3 kg/m² (two coats).
  • Combined system-waterproofing with bituminous building materials: 1.5 kg/m² (one coat).

Density

1.85 kg/L.

Guidance for specification option:

Density of fresh mortar.

CompressiveStrength

-

Manufacturer guidance

  • After seven days: >20 N/mm².
  • After 28 days: >35 N/mm².

Flexural strength

-

Manufacturer guidance

  • After seven days: >4.5 N/mm².
  • After 28 days: >5.5 N/mm².

TensileStrength

>4.5 N/mm².

Guidance for specification option:

Adhesive tensile strength.

Waterproofing

<13 bar.

Guidance for specification option:

Waterproof against pressurized water.

Curing

-

Manufacturer guidance

  • Resistance to foot traffic: After two days (approximately).
  • Full cure: After 14 days (approximately).


Mixing emulsions

-

Manufacturer guidance

  • Negative side waterproofing: Mix with water.
  • Positive side waterproofing: Mix with recommended additive.


Colour

Grey.

Primer

Köster Polysil® TG 500.

Guidance for specification option:

Recommended for use on highly and normally absorbent and dusty or salt-damaged substrates.

Sustainability data

Contains Red List materials

No

Country of product manufacture

Germany

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit

Revit 2016

2

IFC
-

1