Degafloor Full Broadcast System - Resin Flooring

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

A full broadcast system created through the broadcasting of coloured quartz aggregate.

 

A methyl methacrylate (MMA) resin screed with a slip resistant finish. Finished with seal coats which fully encapsulates the system. Also available in a heavy duty option for areas which are continually exposed to high levels of machinery, heavy loads or mechanical process.

 

Features and benefits:

  • Installation - fully cured within two hours at temperatures down to -30°C.
  • Bonds to a wide range of substrates.
  • Seamless and impermeable surface without pinholes or air bubbles.
  • Resistant to chemical and physical attack.
  • Tailored decorative finishes.
  • Resistant to UV light, weathering and temperatures up to 80°C.
  • Manufactured in accordance with BS EN ISO 9001:2015 Certificate 20/Q064 Quality Management Systems.
Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

COBie
BOS_General
NBS_Data
AbrasionResistance
Weight loss <3000 mg
AdhesionStrength
≥2.0 N/mm²
BondStrength
≥B2.0
CapillaryAbsorption
W <0.1 kg/(m²·h^0.5)
CarbonDioxidePermeability
SD >50 m
ChemicalResistance
Reduction in hardness <50%
Colour
Autumn Green
ContainsRedListMaterials
No
CountryOfMaterialOrigin
Germany
CountryOfProductManufacture
Germany
CureTime
Two hours
Execution
Self levelling bodycoat
ImpactResistance
Class I, ≥IR 4
LevellingScreed
Not required
MovementJointsType
Degafloor Flexible Resin Jointing Compound
Primer
Degafloor primer for relevant substrate
ReactionToFire
Not tested
Reinforcement
Not required
ReleaseOfCorrosiveSubstances
SR
ResinFlooring
Degafloor Freeflow 4 mm self levelling,Degafloor Freeflow 4 mm self levelling, scattered with coloured quartz
ResinSkirtingsAndUpstands
To match Degafloor flooring system
Standard
To BS EN 1504 and BS EN 13813
SubstratePreparation
Mechanical preparation required
SubstrateTesting
Bond, moisture and compressive tests undertaken by Degafloor Approved Installer
SurfaceTreatment
Finished with seal coats
SystemCompletion
Slip test to be undertaken
ThirdPartyCertification
To British Board of Agrément-certified (20/Q064)
WaterVapourPermeability
Class III
WearResistance
≤AR 0.5

More BIM objects