Can't find a BIM Object?
Tell us who you would like to see BIM objects from or what objects you would like to see.
NBS Plug-in for Autodesk® Revit® v3.12 update is available. Learn more
Damp proof courses are manufactured from flexible, semi-rigid and rigid materials and installed in masonry walls as, e.g. cavity trays and cloaks. They are also produced as liquids for injection into existing masonry walls
Showing objects most relevant to your location first.
A 0.5 mm thick, flexible seven layer coextruded film providing volatile organic compound (VOC) and ground gas resistance.
A high performance co-polymer thermoplastic damp proof course.
Polymeric Damp Proof Course (DPC) designed for use in applications where combined damp proofing and gas protection is required. Available in a variety of different roll widths.
High performance Damp Proof Course (DPC) designed for use in applications where combined damp proofing, VOC and gas protection is required. Available in a variety of different roll widths.
Bay window vertical cavitray that vertically connects two levels within the same masonry skin without adversely interrupting bonding or coursing.
Internal corner cavity tray used to overcome the problem of site fabrication of difficult junctions.
Left hand stop end to be used to provide protection to the ends of a tray run.
External corner cavity tray, used to overcome the problem of site fabrication of difficult junctions.
Right hand stop end that provides protection too the end a tray run.
Self supporting, horizontal cavity tray.
Preformed DPC cavity tray for all lintel styles and a variety of cavity widths.
Preformed DPC cavity tray with attached lead flashing, for use at pitched roof/ gable abutments.
Provides reliable DPC system for general purpose applications including changes of level, diaphragm walls, porch and garage roof intersections, building off the solid, junctions with bay windows etc.
Right handed intermediate cavity tray for brickwork.
Abutment cavity tray for Brickwork.
Righthand, blockwork abutment tray.
Preformed, self-supporting, moulded DPC cavity tray for use with existing cavity walls.
A fully insulated cavity closer made up into sturdy factory built frame former, eliminating the need for site fabricated timber templates around window and door reveals.
Cavity spacer backing board made from 100% fully recycled plastic.
Cavity spacer backing board made from 100% fully recycled plastic.
Non-combustible cavity tray, classified A2, s1-d0 to EN 13501-1.
Multi-width thermal cavity closer for window and door reveals
Your query has been sent.
A technical consultant from will be in touch soon.
Manufacturers using NBS National BIM Library adhere to our code of conduct.
OmniClass
The creation of BIM objects for the inclusion on the National BIM Library includes Omniclass classification codes and titles.
Copyright © 2014 the secretariat for the OmniClass Development Committee. All Rights Reserved. http://www.omniclass.org/