Select regional version:
The object content is configured for use in UK, but it may also be suitable for use in other locations.
The Meridian Coping System is a secret fixed, low maintenance, aluminium coping system available in standard and bespoke profiles.
Fasteners/ installation:
Wind load conditions require the use of visible fasteners on copings installed more than 10 m above ground level. Where copings are to be used on masonry walls, because of the loadings transferred to the structure it is vital that the top courses of the masonry are tied in adequately. In addition, where uneven surfaces are to be capped, or where perforated bricks are utilized, 25 mm thick plywood must be adequately secured to the top of the wall prior to the installation of the coping system.
| Platform | Compatible | Version | Certified to |
|---|---|---|---|
IFC
|
- | 1 | 1.3 |
Revit
|
- | 2 | 2.1 |
| IfcExportAs |
|
IfcBuildingElementProxyType |
| IfcExportType |
|
USERDEFINED |
| Accessories |
|
Corners, Transitions, Junction, Stopends, Special items to be designed and manufactured specifically for the application |
| ColourOptions |
|
www.dales-eaves.co.uk/finishes |
| CopingType |
|
Clip |
| EnvironmentalProductDeclaration |
|
n/a |
| FinishOptions |
|
Powder coating, Anodised, PVF2, Mill finish, Timber effect powder coating |
| FixingOptions |
|
Secret fix: wall widths up to 500 mm, installed below 10 m; Mechanical fix: wall with widths above 500 mm and 10 m in height |
| Fixings |
|
n/a |
| MaterialThicknessMinimum |
|
Dependant on coping application |
| MaterialThicknessOptions |
|
1.5 mm (Wall width 112-300 mm), 2.0 mm (Wall width 301-410 mm), 2.5 mm (Wall width over 410 mm) |
| Profile |
|
Twice weathered |
System.Data.Entity.DynamicProxies.WhatsChanged_A83DF4F687751E1E2672B9C760C4BBA8A30C5F8438919E335528C906849FBB36 |
