Daikin Applied D-AHU Professional Single Deck

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

The Daikin Applied Standard range covers air flow rates from 1,100 m3/h up to 124,000 m3/h, with the option to choose the most appropriate transverse velocity, depending on the treatment required. In addition, with the same air flow, the cross section (width x height) can be adapted to the dimensional constraints of the installation.

All sizes are a modular construction to facilitate transport and easy assembly on site. With the absence of any welding points the AHU's, on request, can be supplied completely dismantled to allow assembly directly on site.

All units are developed by paying special attention to energy efficiency. Exchange surfaces, motor efficiency, filtration, insulation, friction reduction and pressure drop in the air flow inside the AHU are considered in design development. All of this provides a product ready to be easily inserted in the system and capable of contributing to overall energy savings.

Fully compliant with the new ECO-Design Lot6 requirement EU1253-2014.

Platform Compatible Version Certified to
IFC IFC 2X3 1 1.3
Revit Revit 2016 + 4 2.0

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
AccessOptions
Access doors, double-wall polycarbonate portholes
Accessories
n/a
AccessoryOptions
Range of spigots and flexible connections, louvres, control accessories, etc
AntivibrationMountings
Spring anti vibration mounts, tensioning slide and flexible connections
Certification
Eurovent
ComponentsAttenuators
Rectangular silencers as per client specification
ComponentsCoolingCoils
Warter and DX if required
ComponentsDampersMixing
Aluminium, galvanized and stainless steel as per client specification
ComponentsDampersShutOff
Aluminium, galvanized and stainless steel as per client specification
ComponentsFans
Centrifugal, direct drive, external drive, EC as per client request
ComponentsFilters
As per client specification
ComponentsHeatRecovery
n/a
ComponentsHumidifiers
Evaporative, direct steam, atomizing and adiabatic as per client specification
ComponentsPreheaters
Electric, low temperature hot water, direct/indirect gas heater and DX as per client specification
ComponentsReheaters
Electric, low temperature hot water, direct/indirect gas heater and DX as per client specification
Construction
Double skin
ControlOptions
Optional sensors to regulate temperature, humidity,air quality, inverted drives, regulation valves, damper actuators, safety and control devices
DirectionOfAirflow
Horizontal
DutyAirVolume
n/a
DutyDischargeVelocity
n/a
DutyExternalResistance
n/a
DutySoundPowerLevel
n/a
Environment
External or internal
FanOptions
Forward bladed fan, backward bladed fan, plug fan
FilterOptions
Pleated, flat, rigid bag, soft bag, high efficiency, active carbon absorption, active carbon deodorizing
FlexibleConnections
Optional flexible connections
HeatRecoveryOptions
Heat wheel (sensible or enthalpy type), cross-flow, run-around coils
HumidificationOptions
Surface evaporation, water spray, steam,atomized
MethodOfSupport
Formed channel support
PanelInsulationOptions
Polyurethane or mineral wool
PositionsForMaintenanceAccess
Access doors
RecommendedAirVelocity
2.5 m/s for units including cooling coils
SizeOptions
Range of 27 fixed sizes, as well as custom sizes through increments of 50 mm
SpecificFanPowerVerification
n/a
ThermalEfficiencyWinter
n/a
Weight
n/a
Pset_DoorWindowGlazingType
Pset_ElectricalDeviceCommon

More BIM objects

What's Changed?

6/20/2018

Object upgraded to NBS BIM Object Standard v2.0.

2/9/2017