CORE Drive - Gravel Driveway Stabiliser 60-40 HDR

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Gravel stabilizer most frequently used for driveways and private access roads with gradients of up to 20% (1 in 5). This grid is also capable of taking heavier vehicles on a regular basis and occasional HGV through traffic. The large cell is designed to take up to 28 mm angular aggregate.

The sheets are supplied with a 50 g/m² non-woven weed membrane heat welded to the underside of the grid. This not only prevents weed growth from beneath the surface, but also prevents the gravel from migrating under the cell wall and into the sub base over time.

This grid has a 10 mm foot at the base of the cell to evenly distribute the traffic load and cylindrical columns that allow pinning for steeper gradients (20%) using our galvanised 9 x 225 mm steel pins.

Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More information
  • More BIM objects

Properties and values

COBie
BOS_General
NBS_Data
LoadCarryingCapacityMinimum
n/a
PhysicalPropertiesColour
Black
PhysicalPropertiesDimensionsPlanSize
(1150 x 1000 mm) 1.15m²,
PhysicalPropertiesDimensionsThicknessMinimum
40 mm (width 60mm)
PhysicalPropertiesMaterial
Recycled Polypropylene
PhysicalPropertiesProfileInterlockingFeatures
Socket & Pin (all 4 sides) with Attached 50 gsm non-woven membrane
PhysicalPropertiesProfilePaverType
20 mm Graded (max 24mm) aggregate
PhysicalPropertiesTopSurfaceFinish
Aggregate
Pset_CoveringCommon

More information

More BIM objects