Vecta+ Sensor Spout

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

The Vecta+ Sensor Tap range are easy to install, as retrofit or new build installations. They help to improve hygiene and prevent the transfer of pathogens with no-touch controls. With an infrared tap, the water only runs while your hands are in range, so these taps reduce wasted water, increase efficiency, save energy and reduce costs, while maintaining reliability and high performance.

 

Made to high standards, with options for mains or battery power, out of the box as standard. The range of infrared sensor taps have a stylish and modern design, with highly intelligent electronics, that offer a safeguard to misuse and vandalism. They provide the optimum in hygiene for the modern-day commercial washroom and comes fitted with 3.5 lpm flow regulator as standard with a 5 lpm flow regulator in the box, to support environmental building schemes such as BREEAM.

 

Wall / panel mounted single supply basin tap, with infrared sensor for hygienic hands-free, non-touch operation, mains or battery powered external valve and 3.5 or 5.0 litre per minute flow rate options.

 

Features and benefits:

 

  • Improved hygiene and reduce the transfer of infection.
  • Non touch – Intuitive and easy to use. These non-touch solutions are more hygienic and reduce the likelihood of spreading and receiving pathogens
  • Water saving and energy efficient – the Vecta+ Sensor Tap contributes to building and environmental schemes, BREEAM.
  • Easy to install and maintain – chrome finished, easy to retrofit and swap out existing manual taps. External solenoid for easier servicing.
  • Mains and battery power options out of the box.
  • Safety shutoff - After 60 seconds of continuous water activation via sensor detection, the tap will automatically stop the flow of water to reduce the risk of flooding.
  • Smart shutoff - in the event of a power cut the device will automatically switch off the water flow to reduce the risk of a flooding event.
  • Support environmental building schemes.
  • Suitable for elderly or people with reduced mobility.
  • Optional extra: can added copper inlet pipes.

 

How the product works:

 

  • The flow of water from the taps is turned on when the user presents their hands to the infrared sensor which is located on the lower body of the Vecta+ Sensor Tap.
  • The infrared tap sends out an infrared LED bean (invisible to the human eye).
  • When something interrupts this infrared beam, for example the user’s hand, the infrared light is bounced back to the receiver in the taps, which switches on the solenoid valve, to allow the water to flow.
  • No contact is required. The sensor automatically activates the externally-sited solenoid valve.
  • When the user’s hands are moved away the flow of water stops after a two second delay.
Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

IFC
IfcExportAs
IfcValveType
IfcExportType
FAUCET
COBie
BOS_General
NBS_Data
Approval
n/a
ContainsRedListMaterials
n/a
Control
6 V DC 1 A
CountryOfMaterialOrigin
n/a
CountryOfProductManufacture
n/a
Dimensions
243 x 38 x 38 mm
EmbodiedCarbon
n/a
FlowRateMaximum
3.5 L/min, 5 L/min
Form
Wall-mounted, sensor spout, Panel mounted, sensor spout
InletsOutletsDiameter
15 mm
IntegralAccessories
Not required, Multi-Product Power Supply Unit (PSUC), Copper inlet pipe
MaterialsBody
Brass
MaterialsFinishAndColour
Chrome plated
Mounting
Any vertical surface 10ȓ40 mm in thickness, requires a hole of 26-32.5 mm in diameter
NozzleProjection
207 mm
Operation
Infrared sensor
PowerSupply
Batteries, Mains supply
PressureRange
0.5 to 6 bar
Recyclability
n/a
RecycledContent
n/a
Sensor
18 cm
Standards
n/a
TemperatureRange
0Ȕ40 °C
WaterSupplyTemperatureMaximum
n/a
WorkingTime
Two seconds.

More BIM objects