Easyflush Direct Mains Power Adapter

Select regional version:


The object content is configured for use in UK, but it may also be suitable for use in other locations.


How it works

Easyflush Direct includes a valve, DC pipe interruptor and sensor.

When the sensor is activated, the valve is activated for between 2 and 3.5 seconds, supplying water to flush the WC direct from the mains water supply. After this period, the valve closes and the flush is complete, but can be activated again immediately.

There are two versions to suit different applications:

Easyflush Direct Wave is operated by the user bringing their hand towards the infrared sensor. A part flush is triggered by holding one’s hand in place near the sensor for about 1 second and a full flush is triggered by a slightly longer hand pass.

Easyflush Direct Walkaway is activated when the user stands up or leaves the cubicle, but it can also be activated by the user bringing their hand toward the sensor. A part flush is triggered by short user occupancy and a full flush by long user occupancy (over 45 seconds).


  • No cistern required – saves space.
  • No inlet valves – reduced installation cost.
  • No cistern refill – immediate re-flush for busy areas.
  • Infrared sensor operated.
  • Hygiene flush to maintain cleanliness.
  • Range of flow rates.
  • Compliant with Water Regulations. WRAS approved.
  • BREEAM Wat 01 compatible product.
Platform Compatible Version Certified to
IFC IFC - 2 2.0
Revit Revit 2016 + 2 2.0

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values


More information

  • NBS specification data
    Case studies and technical literature
  • More BIM objects

    What's Changed?


    Updated to BOS2.0 and IFC4