Liner Sheet with Bar and Bracket

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Using the COMBI-BAR System to create insulation voids able to low U value's. Includes varying height COMBI-BAR brackets, varying height halter clips and thermal barrier pads. This is a system suitable for purlin centres up to 1.5 m centres depending upon loadings.

Platform Compatible Version Certified to
IFC IFC 2X3 5 1.3
Revit Revit 2016 + 6 2.0

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
AcousticInsulation
n/a
AcousticInsulationOptions
Silent acoustic fleece can be attached to the underside of panel
BracketOptions
Heights up to 180 mm in 10 mm increments
BreatherMembraneJointSealant
n/a
BreatherMembraneMaterial
n/a
ExternalSheetOptions
BEMO N65/305, BEMO N65/333, BEMO N65/400, BEMO N65/500
ExternalSheetsEndAndSideLaps
No end laps, mechanically seamed side laps
ExternalSheetsMaterial
0.9 mm BEMO N65/305 aluminium profiled sheet
ExternalSheetsPrimaryFasteners
Stainless steel self tapping screws complete with 16 mm diameter stainless steel / EPDM bonded washers ȓ grade, thread type and length to suit construction. Contact BEMO Technical for project specific calculations to identify specific fastener codes
ExternalSheetsSecondaryFixings
Stainless steel self tapping screws complete with 16 mm diameter stainless steel / EPDM bonded washers ȓ grade, thread type and length to suit construction. Contact BEMO Technical for project specific calculations to identify specific fastener codes
Glazing
n/a
GuttersFasteners
n/a
GuttersJointing
n/a
GuttersMaterial
n/a
GuttersSupport
n/a
HalterClipBarrierPadOptions
3 mm or 15 mm
HalterClipOptions
Aluminium halter from 80 - 220 mm in 20 mm increments
LinerSheetsEndAndSideLaps
Side laps stitched at 450 mm centres
LinerSheetsMaterial
BEMO 32/1000 carbon steel liner sheet
LinerSheetsPrimaryFasteners
Stainless steel self tapping screws complete with 16mm diameter stainless steel / EPDM bonded washers ȓ grade, thread type and length to suit construction. Contact BEMO Technical for project specific calculations to identify specific fastener codes
Spacers
n/a
SystemAccessories
n/a
ThermalInsulation
220 mm BEMO-THERM glass wool insulation, compressed to 215 mm
ThermalInsulationThicknessOptions
BEMO-THERM: 80 mm, 100 mm, 120 mm, 140 mm, 160 mm, 180 mm, 200 mm, 220 mm
TopHatOptions
30 - 100 mm in 10 mm increments
VapourControlLayerEdgeSupports
n/a
VapourControlLayerFasteners
Membrane tape
VapourControlLayerMaterial
BEMO-CLEAR reinforced polyethylene vapour control layer
VapourControlLayerSealing
Sealant tape using 150 mm laps
Pset_RoofCommon

More BIM objects

What's Changed?

3/10/2017

Changes to reflect updates to the NBS BIM Object Standard v1.3

  • Removal of Uniclass2 property
  • Addition of Uniclass 2015 properties
  • Addition of COBie Category property value

Objects have also been updated to Revit 2015