Bauder Bakor Hot Melt Inverted Roof System - Hot Applied

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Hot liquid applied, inverted, hot melt structural waterproofing roof system suitable for new build and intensive green roof applications, and used primarily on concrete decks. Ideal as waterproofing beneath most protected roofs such as paved, podium, plazas, ballasted and car park surfaces.

Features:

  • Seamless application provides monolithic waterproofing
  • Durability to match expected life of building
  • Excellent flexibility and adhesion characteristics
  • Infills minor irregularities
  • System can be installed in temperatures as low as -18⁰C

Certifications:

  • BBA Certificate 06/4350

Environmental Credentials:

  • System contains post-consumer recycled content
  • BRE Green Guide Generic A+ Rating for BauderJFRI (200) and Generic A
Platform Compatible Version Certified to
Revit Revit - 2 2.1

  • Properties and values
  • More information
  • More BIM objects

Properties and values

IFC
Documentation
www.Bauder.co.uk
DocumentReference
www.Bauder.co.uk
IfcExportAs
IfcRoofType
IfcExportType
FLAT_ROOF
MethodOfMesurement
n/a
Process
Replacement at service life intervals
ReferenceStandard
n/a
WarrantyName
n/a
COBie
NBS_General
NBS_Data
Ballast
n/a
CarrierMembraneFixing
n/a
CarrierMembraneType
n/a
Certification
BBA Certificate No. 06/4350
FillToPerimeterUpstands
n/a
FilterLayer
Bauder JFRI 0.45 mm Polypropylene Vapour Permeable Membrane
InsulationFixing
Loose ballasted
InsulationType
Bauder JFRI(TYPE TBC) EPS Insulation 200 mm
LiquidAppliedWaterproofCoatingReinforcement
Bauder Reinforcement Fleece
LiquidAppliedWaterproofCoatingSurfaceTreatment
n/a
LiquidAppliedWaterproofCoatingType
Bauder Bakor Black hotmelt hot liquid applied waterproofing
PreparationExistingSubstrates
Prepare and prime as per project specific Bauder Specification
PreparationHorizontalWork
Prepare and prime as per project specific Bauder Specification
PreparationSkirtingsAndVerticalWork
Prepare and prime as per project specific Bauder Specification
ProjectSpecificationAndDesign
This BIM Object must be supported by a project specific specification from Bauder, incorporating system build-up, detail design and performance calculations if a full Bauder system warranty is required. Please contact your local Bauder Representative or technical@bauder.co.uk
ProtectionLayer
Bauder AP1 2.2 mm bitumen sand finished membrane
SystemAccessories
Wide range of accessories available including Insulated Outlets, GRP Trims, Solar Panels and Rooflights. For further information please contact your local Bauder Representative or technical@bauder.co.uk
SystemManufacturer
Bauder Ltd
Update
12/31/1900 11:59:59 PM
WarrantyConsiderations
All guarantees available for this system are subject to the works being carried out in accordance with the Bauder specification and being installed by a Bauder Approved installer. For full details and further information regarding guarantees and alternative systems please contact your local Bauder Representative or technical@bauder.co.uk
Pset_RoofCommon

More information

  • NBS specification data
    Bakor790-11 Hot Melt Rubberized Bitumen Roof Covering System Inverted
    Bakor790-11 Hot Melt Rubberized Bitumen Roof Covering System Inverted

    • More BIM objects