MxPro 4 Remote Terminal Fire Alarm Control Terminal

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Based around two core products, the MxPro 4 Remote Display Terminal (RDT) and the fully functional MxPro 4 Remote Control Terminal (RCT), both utilise the same graphical LCD user interface that can be found on the MxPro 4 series fire panels and are based upon the same advanced, flash based, microprocessor technology.

All MxPro 4 series panels and remote terminals can communicate over the same 2-core network cable.

Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.

The 'Ad-NeT' network operates as a true peer-to-peer system with full cross panel reporting, control and cause and effect functionality of up to 1000 zones.

Features:

  • The display information is fully programmable by individual zone or sector and can display any combination of fires, faults, pre-alarms or plant alarms. E.g. can display all information in its own sector, but can only show fire signals from other sectors of a building.
  • Both remote terminals incorporate buzzer mute, view, enable/disable and test facilities with a dedicated system and navigation keys for simple user control.
  • Fully on-site programmable via onboard alphanumeric keypad or PC configuration tools.
  • The RCT has additional sector based control keys for Evacuate, Silence, Resound and Reset, which allows other networked panels to selectively respond to controls as programmed. E.g. on a site with multiple buildings, a user may be allowed to silence and reset fires originating in their own building. Fires originating from other buildings are displayed but cannot be reset.
  • By using flash memory and an advanced graphical display the remote terminals can be easily configured to operate in virtually any language, with any character set and allows for the installer’s logo and company details to be displayed on the LCD display during normal operation.
Platform Compatible Version Certified to
IFC IFC - 2 2.0
Revit Revit 2017 + 2 2.0

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

IFC
IfcExportAs
IfcControllerType
IfcExportType
PROGRAMMABLE
COBie
BOS_General
NBS_Data
Controls
To BS EN 54-2
EnclosureMountingOptions
Surface, recessed
Indications
Fault signals from points
InputDevice
Via on-board keypad or pc running windows tools
MainDisplay
Backlit 240 x 64 graphical LCD
Outputs
Output to fire alarm devices
Printer
Output to separate printer
StandbyPowerSupplyStandard
To BS EN 54-4
Pset_ControllerTypeCommon
Pset_ControllerTypeProgrammable
Pset_ElectricalDeviceCommon

More BIM objects

What's Changed?

10/24/2018

Updated manufacturer email address.