Addastone - Resin Bonded Surfacing System

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

The Addastone Resin Bonded Surfacing System provides an attractive, hard wearing and low maintenance surface by bonding or fixing loose gravel aggregates to concrete or asphalt. Standard aggregates used are 1 to 3 mm or 2 to 5 mm in a wide range of colours.

Aggregates bonded in this way give the appearance of loose gravel without the many maintenance problems.

A wide range of natural and recycled aggregates are available, making it ideal for heritage sites, landscaping schemes, parks, paths, driveways, roads and visitor attractions. A real alternative to block paving, tarmac, and concrete finishes.

Platform Compatible Version Certified to
IFC IFC 2X3 2 1.3
Revit Revit 2016 + 3 2.0

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
AggregateColourOptions
Autumn Gold, Brittany Bronze, Chinese Bauxite, Corn Flint, Dorset Gold, Guyanan Bauxite, Natural Red Granite, Rhine Gold, Silver Grey Granite, Trent Pea
AggregateSizeOptions
1-3 mm (not available with Dorset Gold, Rhine Gold or Trent Pea), 2-5 mm (not available with Chinese Bauxite, Guyanan Bauxite or Trent Pea), 3-6 mm (for Trent Pea only)
AggregateType
n/a
Applications
Car parks, access roads, driveways, courtyards, pathways, patios, bridges (steel, wood and concrete), playgrounds and logos
BinderColour
Natural, Buff or Coloured
BinderDensity
1.11 g/cm³
BinderType
Polyurethane resin or Epoxy resin
Coverage
Typical covergae rates: 1-3 mm Aggregate 1.6 kgs per sqm, 2-5 mm aggregate 2.2 kgs per sqm
CuringTime
4-5 hours
DepthOptions
n/a
EnvironmentalProductDeclaration
n/a
Geomembrane
n/a
RecycledContent
n/a
Reinforcement
n/a
SlipResistanceWaterWet
n/a
Pset_CoveringCommon
Pset_CoveringFlooring

More information

  • NBS specification data
    Case studies and technical literature
  • More BIM objects

    What's Changed?

    3/9/2017

    Changes to reflect updates to the NBS BIM Object Standard v1.3

    • Removal of Uniclass2 property
    • Addition of Uniclass 2015 properties
    • Addition of COBie Category property value

    Objects have also been updated to Revit 2015