Boost'R Hybrid

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

A thin, multifoil insulation with built-in breather membrane function composed of nine layers, including a watertight reflective breather membrane, polyester wadding layers and perforated coated metal polyolefin films.

Typically installed as a breathable membrane on the outside face of walls, but it can also be used above rafters in a roof and under suspended timber floor joists. The product should be installed in a continuous layer to guarantee insulation, airtightness and water tightness. It is not intended to be used alone without weather protection (e.g. roof tiles).

CE-marked in accordance with EN 13859-1/2 and has been designed for and fully tested in accordance with the EN 16012 standard for reflective insulation, including the application of 90/90. All testing of the product has been carried out by accredited independent test houses including VTT Expert Services Ltd. The product has been tested in-situ according to ISO 9869 by Glasgow Caledonian University. In accordance with BS 5534, the product is suitable for all wind zones (1-5) throughout the UK. It has been awarded LABC and LABSS Registered Detail, is accepted by NHBC, LABC Warranty and Premier Guarantee and holds BM TRADA Q-Mark.

Platform Compatible Version Certified to
IFC IFC - 5 2.0
Revit Revit 2016 + 5 2.0

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

IFC
IfcExportAs
IfcCoveringType
IfcExportType
INSULATION
COBie
BOS_General
NBS_Data
Accessories
Actis Tape, Actis Cutter
AirPermeability
<0.030 m³/(m² x h x 50 Pa)
Applications
Walls, but also roofs, suspended timber and steel floors
CEMark
EN 13859-1 and 2, prEN 16863
DimensionalStability
+80°C/ 6 h < 1%
DurabilityAfterAgeing
n/a
Elongation
Longitudinal: >20%; Transversal: 10%
EnvironmentalProductDeclaration
n/a
EvidenceOfCompliance
n/a
Fixing
Galvanised staples
FlexibilityAtLowTemperature
-30/ 30°C/ ø30 mm
ImpactResistance
n/a
InstallationDocumentation
www.insulation-actis.com
InternalAirQualityClass
A+
Joints
n/a
JointStrength
n/a
NumberOfLayers
Nine
Overlaps
50 to 100 mm, overlaps should be taped with Actis Tape
PeelStrengthTape
n/a
ReflectiveFacing
Required
SpecificHeatCapacity
n/a
TearResistance
Longitudinal: >150 N, Transversal: >150 N
TensileStrength
Longitudinal: >300 N/50mm, Transversal: >300 N/50mm
TensileStrengthTape
n/a
ThermalConductivityMaximum
0.026 W/m °K
ThermalEmissivityBack
0.05
ThermalEmissivityFront
0.31
ThermalResistance
Boost'R Hybrid plus two air cavities after ageing: Horizontal heat flow 2.40 m² K/W, Upward vertical heat flow: 2.10 m² K/W
ThermalResistanceCore
1.35 m² K/W
ThirdPartyProductCertification
VTT certificate, BM Trada Q-mark, LABC & LABSS Registered Detail,
WarrantySchemes
NHBC, LABC and Premier warranty acceptance
WaterPermeability
n/a
Watertightness
Watertight, W1
WaterVapourResistance
0.55 MNs/g
WaterVapourResistanceExternalLayer
0.25 MNs/g
WaterVapourTransmission
Sd ≤0.11 m
Weight
650 g/m²
WindResistance
Suitable for zones 1 to 5 (throughout the UK) according to BS5534
Pset_CoveringCommon

More BIM objects

What's Changed?

6/7/2018

Manufacturer updated technical information.

5/30/2018
5/22/2018