Select regional version:
The object content is configured for use in UK, but it may also be suitable for use in other locations.
A thin, multifoil insulation with built-in breather membrane function composed of nine layers, including a watertight breather membrane, polyester wadding layers and perforated coated metal polyolefin films.
Typically installed as a breathable membrane above rafters in a roof, but it can also be used on the outside face of walls and under suspended timber floor joists. The product should be installed in a continuous layer to guarantee insulation, airtightness and water tightness. The product is not intended to be used alone without weather protection (e.g. roof tiles).
CE-marked in accordance with EN 13859-1/2, and has been designed for and fully tested in accordance with the EN 16012 standard for reflective insulation, including the application of 90/90. In accordance with BS 5534, it is suitable for all wind zones (1–5) throughout the UK. The product has been awarded LABC and LABSS Registered Detail, is accepted by NHBC, LABC Warranty and Premier Guarantee and holds BM TRADA Q-Mark.
| Platform | Compatible | Version | Certified to |
|---|---|---|---|
IFC
|
- | 5 | 2.0 |
Revit
|
2016 + | 5 | 2.0 |
| IfcExportAs |
|
IfcCoveringType |
| IfcExportType |
|
INSULATION |
| Accessories |
|
Actis Tape, Actis Cutter |
| AirPermeability |
|
<0.030 m³/(m² x h x 50 Pa) |
| Applications |
|
Roofs, but also suitable for walls and suspended timber and steel floors |
| CEMark |
|
EN 13859-1 and 2, prEN 16863 |
| DimensionalStability |
|
+80°C/ 6 h < 1% |
| DurabilityAfterAgeing |
|
n/a |
| Elongation |
|
Longitudinal: >20%; Transversal: 10% |
| EnvironmentalProductDeclaration |
|
n/a |
| EvidenceOfCompliance |
|
n/a |
| Fixing |
|
Galvanised staples |
| FlexibilityAtLowTemperature |
|
-30/ 30°C/ ø30 mm |
| ImpactResistance |
|
n/a |
| InstallationDocumentation |
|
www.insulation-actis.com |
| InternalAirQualityClass |
|
A+ |
| Joints |
|
n/a |
| JointStrength |
|
n/a |
| NumberOfLayers |
|
Nine |
| Overlaps |
|
Integrated self-adhesive tape |
| PeelStrengthTape |
|
n/a |
| ReflectiveFacing |
|
Internal only |
| SpecificHeatCapacity |
|
n/a |
| TearResistance |
|
Longitudinal: >150 N, Transversal: >150 N |
| TensileStrength |
|
Longitudinal: >300 N/50mm, Transversal: >150 N/50mm |
| TensileStrengthTape |
|
n/a |
| ThermalConductivityMaximum |
|
0.026 W/m·°K |
| ThermalEmissivityBack |
|
0.05 |
| ThermalEmissivityFront |
|
0.9 |
| ThermalResistance |
|
Boost'R Hybrid Roof plus two air cavities after ageing: Horizontal heat flow 2.15 m²K/W |
| ThermalResistanceCore |
|
1.35 m²·K/W |
| ThirdPartyProductCertification |
|
VTT certificate, BM Trada Q-mark, LABC & LABSS Registered Detail, |
| WarrantySchemes |
|
NHBC, LABC and Premier warranty acceptance |
| WaterPermeability |
|
n/a |
| Watertightness |
|
Watertight, W1 |
| WaterVapourResistance |
|
0.55 MNs/g |
| WaterVapourResistanceExternalLayer |
|
0.25 MNs/g |
| WaterVapourTransmission |
|
Sd ≤0.11 m |
| Weight |
|
650 g/m² |
| WindResistance |
|
Suitable for zones 1 to 5 (throughout the UK) according to BS 5534 |
Manufacturer revision |
