Schlüter®-KERDI-SHOWER-TC

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Schlüter®-KERDI-DRAIN-BASE is available as a set. Depending on the conditions of the construction site, other variants of Schlüter®-KERDI-DRAIN may be used as well. Various sets of Schlüter®-KERDI are available for waterproofing the wall areas.

The surface of the sloped trays already has the necessary gradient of > 2 % (except for long sides of sloped trays with the dimension 180 x 90 cm).

The drain body and the drainage pipe are inserted into the levelling board, which represents the lowest possible construction height and can be adjusted, for example with a mortar layer.

The available base dimensions are:
90 x 90 cm
100 x 100 cm
120 x 120 cm
150 x 150 cm
90 x 180 cm

Smaller dimensions can easily be cut to size with a utility knife. The material features prepared cutting grooves for circular cuts.

The matching floor drain for the system, Schlüter®-KERDI-DRAIN-BASE (for horizontal drainage), has a drain capacity of 0.4 l/s.

Matching variants of Schlüter®-KERDIDRAIN are available for special cases with higher drain capacity needs, vertical drains, or other requirements.

Platform Compatible Version Certified to
IFC IFC - 1 1.3
Revit Revit 2016 + 2 2.0

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
EnvironmentalProductDeclaration
n/a
Form
Square
IntegralAccessories
n/a
WasteHole
130 mm, centre
Pset_SanitaryTerminalTypeShower

More information

  • NBS specification data
  • More BIM objects

    What's Changed?

    8/9/2018

    Object upgraded to NBS BIM Object Standard v2.0.