Schlüter®-BEKOTEC-EN/PF

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Schlüter ® -BEKOTEC is a modular screed system for crack free and functionally safe floating screeds and heated screeds with coverings made of ceramic tiles, natural stone or other materials.

The system is based on the studded polystyrene screed panel, Schlüter ® -BEKOTEC-EN, which is directly installed on top of load bearing substrates or conventional heat insulation and/or sound insulation panels.

The geometry of the Schlüter ® -BEKOTEC-EN studded panel results in a minimum screed thickness of 32 mm between the studs and 8 mm above the studs. The studs form a grid pattern with a distance of 75 mm between them to accept the 16 mm diameter heating pipes if a heated screed is to be installed.

The floor heating system is easily adjustable and ideally suited for use with low temperatures, since the screed volume to be heated or cooled is relatively small (approx. 57 kg/m 2 or 28.5 l/m 2 with 8 mm coverage).

The curing stresses that occur in the screed due to shrinkage are absorbed by the studded pattern, thus controlling deformations such as curling over the entire area. It is therefore unnecessary to install movement joints or control joints in the screed. As soon as the cement screed is ready to support weight, the uncoupling mat Schlüter ® -DITRA 25 can be installed (calcium sulphate screed ≤ 2 CM-%).

Ceramic tiles or natural stone tiles are then installed directly over this layer, using the thin-bed method. Movement joints in the covering layer are created using Schlüter ® -DILEX according to industry guidelines.

Cover materials that are not susceptible to cracking, such as parquet or carpeting, can be directly installed over the screed as soon as it reaches the necessary residual moisture level for the corresponding covering.

Platform Compatible Version Certified to
IFC IFC 2X3 2 1.3
Revit Revit 2016 + 3 2.0

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
Accessories
Schlüter®-BEKOTEC-BRS 808KF, Schlüter®-BEKOTEC-BRS 810, Schlüter®-BEKOTEC-BTS, Schlüter®-DILEX-DFP , Schlüter®-BEKOTEC-ENR 1520P, Schlüter®-BEKOTEC-THERM-HR
Certification
n/a
CompressiveStrength
n/a
Edges
Tongue and grooved
EnvironmentalProductDeclaration
n/a
Facing
Metal foil
GridSpacing
75 mm
HeatConductorGroup
033 (0.033 W/m2K)
HeatingCalculations
For more information with regards to heating calculations and information speak to Schlüter Systems Ltd sales@schluter.co.uk
MassDensity
0
MaterialClassification
B2 pursuant to DIN 4102
RecycledContent
n/a
SpecificHeatCapacity
0
StudHeight
24 mm
SuitableCoverings
Floating and heated screeds with coverings made of ceramic tiles, natural stone and other materials
SuitableSubstrates
An even and sufficiently load bearing substrate
ThermalConductivity
0
ThermalIrEmissivityBack
0
ThermalIrEmissivityFront
0
ThermalResistivity
0.606 m2K/W
UValue
1.650 W/m2K
Pset_CoveringCommon

More information

  • NBS specification data
  • More BIM objects

    What's Changed?

    8/9/2018

    Object upgraded to NBS BIM Object Standard v2.0.

    2/28/2017