B439 - Plate heat exchanger

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

The efficient B439 is designed as a singlephase heat exchanger for use across a wide range of heating and cooling application. The B439 is also suitable for district cooling systems. For example, in an indirect system where minimal energy losses are required, the B439 can be used as a pressure breaker to decrease the static pressure.

is capable of handling a water flow rate up to 120 m3/h.

Platform Compatible Version Certified to
IFC IFC 2X3 2 1.3
Revit Revit 2016 + 3 2.0

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
BPHEWeight
341.53
ConnectionsCentresDistanceHorizontal
179
ConnectionsCentresDistanceVertical
854
ConnectionsLength
54.2
ConnectionsLengthOptions
54.2 mm
CornerRadius
44
InnerCircuitMaximumWorkingPressureAtTestTemperature1
3100000
InnerCircuitMaximumWorkingPressureAtTestTemperature2
2700000
InnerCircuitTestPressure
5000000.01
InternationalContactInformation
www.swep.net/​en/​contact/​Pages/​default.aspx
LeadingPlateThickness
6
MaterialBrazing
Pure Copper
MaterialGaskets
n/a
MaterialStandardConnection
Stainless steel, 1.4401
MaterialStandardPlates
Parts in contact with fluid: stainless steel, 1.4401; parts not in contact with fluid: stainless steel, 1.4301
MaximumNumberOfPlates
360
MaximumTemperature
225
MinimumTemperature
-196
Output
To determine Output please visit the web link recorded against either SSPCalculationSoftware or InternationalContactInformation. Please replace this text once the value has been defined using specification / selection software SSPG7.
PortSize
100
PrimaryMediumFlowRate
To determine PrimaryMediumFlowRate please visit the web link recorded against either SSPCalculationSoftware or InternationalContactInformation. Please replace this text once the value has been defined using specification / selection software SSPG7.
PrimaryMediumFluid
To determine PrimaryMediumFluid please visit the web link recorded against either SSPCalculationSoftware or InternationalContactInformation. Please replace this text once the value has been defined using specification / selection software SSPG7.
PrimaryMediumInletTemperature
To determine PrimaryMediumInletTemperature please visit the web link recorded against either SSPCalculationSoftware or InternationalContactInformation. Please replace this text once the value has been defined using specification / selection software SSPG7.
PrimaryMediumOutletTemperature
To determine PrimaryMediumOutletTemperature please visit the web link recorded against either SSPCalculationSoftware or InternationalContactInformation. Please replace this text once the value has been defined using specification / selection software SSPG7.
PrimaryMediumPressureLoss
To determine PrimaryMediumPressureLoss please visit the web link recorded against either SSPCalculationSoftware or InternationalContactInformation. Please replace this text once the value has been defined using specification / selection software SSPG7.
PrimaryMediumWorkingPressure
To determine PrimaryMediumWorkingPressure please visit the web link recorded against either SSPCalculationSoftware or InternationalContactInformation. Please replace this text once the value has been defined using specification / selection software SSPG7.
SecondaryCircuitMaximumWorkingPressureAtTestTemperature1
3100000
SecondaryCircuitMaximumWorkingPressureAtTestTemperature2
2700000
SecondaryCircuitTestPressure
5000000.01
SecondaryMediumFlowRate
To determine SecondaryMediumFlowRate please visit the web link recorded against either SSPCalculationSoftware or InternationalContactInformation. Please replace this text once the value has been defined using specification / selection software SSPG7.
SecondaryMediumFluid
To determine SecondaryMediumFluid please visit the web link recorded against either SSPCalculationSoftware or InternationalContactInformation. Please replace this text once the value has been defined using specification / selection software SSPG7.
SecondaryMediumInletTemperature
To determine SecondaryMediumInletTemperature please visit the web link recorded against either SSPCalculationSoftware or InternationalContactInformation. Please replace this text once the value has been defined using specification / selection software SSPG7.
SecondaryMediumOutletTemperature
To determine SecondaryMediumOutletTemperature please visit the web link recorded against either SSPCalculationSoftware or InternationalContactInformation. Please replace this text once the value has been defined using specification / selection software SSPG7.
SecondaryMediumPressureLoss
To determine SecondaryMediumPressureLoss please visit the web link recorded against either SSPCalculationSoftware or InternationalContactInformation. Please replace this text once the value has been defined using specification / selection software SSPG7.
SecondaryMediumWorkingPressure
To determine SecondaryMediumWorkingPressure please visit the web link recorded against either SSPCalculationSoftware or InternationalContactInformation. Please replace this text once the value has been defined using specification / selection software SSPG7.
SSPCalculationSoftware
www.swep.net/​en/​products_​solutions/​ssp_​calculation_​software/​Pages/​default.aspx
TestTemperature1
428.15
TestTemperature2
498.15
TotalThicknessOfPlates
836.4
Pset_HeatExchangerTypeCommon
Pset_HeatExchangerTypePlate

More BIM objects

What's Changed?

1/19/2017

Changes to reflect updates to the NBS BIM Object Standard v1.3

  • Removal of Uniclass2 property
  • Addition of Uniclass 2015 properties
  • Addition of COBie Category property value

Objects have also been updated to Revit 2015