Mapeproof One Coat

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Two-component, single coat application, damp proof membrane for controlling residual and constructional moisture in cementitious substrates.

It is used on cementitious floors with residual or constructional moisture levels of above 75% RH and below 97% relative humidity prior to the installation of resilient floor coverings.

The product can be applied over mechanically prepared power floated concrete sub floors or over sand/cement screeds that are laid over an effective moisture barrier.

Platform Compatible Version Certified to
IFC IFC 2X3 2 1.3
Revit Revit 2015 + 3 1.3

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
Admixture
n/a
Application
Notched trowel
ApplicationTemperatureRange
10-30°C
BCAWearResistance
n/a
BondStrength
>4 MPa
ColourOptions
n/a
CompressiveStrength
n/a
Consistency
Liquid
Density
n/a
DryingTime
Foot traffic: 5 hours; Full cure: 24 hours
Elongation
n/a
FlexuralStrength
n/a
Form
Two-component
ImpactStrength
n/a
pH
n/a
SolidsContent
n/a
SuitableCoverings
n/a
SuitableSubstrates
Concrete, screeds
ThirdPartyCertification
n/a
Viscosity
4500 MPa-s
WaterVapourPermeability
n/a
WorkingTemperatureRange
-20 to +80°C
Pset_CoveringCommon
Pset_CoveringFlooring

More BIM objects

What's Changed?

2/28/2017

Changes to reflect updates to the NBS BIM Object Standard v1.3

  • Removal of Uniclass2 property
  • Addition of Uniclass 2015 properties
  • Addition of COBie Category property value

Objects have also been updated to Revit 2015