To embed this BIM object onto your website, simply copy and paste the HTML code below.
<iframe src="https://www.nationalbimlibrary.com/en/syndicationgeneration/iframesingle/?objectId=220582" frameborder="0" width="225" height="285"></iframe>
The object content is configured for use in UK, but it may also be suitable for use in other locations.
A DUHS hospital disposal unit manufactured from 1.2 mm thick, grade 1.4301 (304) stainless steel with a satin polish finish. The top is turned down on all four edges and incorporates a wet area recess, bowl in the middle and a sluice hopper. The hopper has a 110 mm dia. outlet which can accept a P or S trap, available as an extra.
A wash up bowl is positioned next to the sluice hopper and is prepared for a 38 mm waste outlet. The wash up bowl does not have an overflow, flush grated wastes are availble as an extra, also available are 9 litre capacity plastic cisterns with plastic downpipe, these are fitted with a 13 mm HP brass valve, plastic float and CP metal flushing lever handles. The unit should only be fed from a cistern or tank water supply.
Included in object:
Your query has been sent.
A technical consultant from will be in touch soon.
Manufacturers using NBS National BIM Library adhere to our code of conduct.
The creation of BIM objects for the inclusion on the National BIM Library includes Omniclass classification codes and titles.
Copyright © 2014 the secretariat for the OmniClass Development Committee. All Rights Reserved. http://www.omniclass.org/