Daikin Applied D-AHU Modular

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Daikin Applied’s Modular series come in pre-defined sizes and are available as indoor or outdoor versions. This means that modular systems can be designed and installed in a variety of applications.

With an operating range of -25°C (-40°C with electric heaters) to +43°C, they are suitable for any European climate. Our air handling units are wired at the factory and are also pre-commissioned, with each unit’s software tuned and the set points already established.

On site, all that is required is to plug the system into the power supply, connect any pipes and wires, and switch the unit on. 

Features such as Constant Air Flow (CAV) or Pressure control (VAV), economy mode, night time operation and time scheduling all deliver considerable overall savings. 

Like all our air handling units, the Modular series are compatible with all common heating and cooling equipment. They are extremely user-friendly due to their full compatibility with ITM and all other Daikin Applied equipment.

Fully compliant with the new ECO-Design Lot6 requirement EU1253-2014.

Included in object:

D-AHU Modular Size 1 - 1700x 720 x 1320 mm
D-AHU Modular Size 2 - 1700 x 820 x 1320 mm
D-AHU Modular Size 3 - 1800 x 990 x 1540 mm
D-AHU Modular Size 4 - 1920 x 1200 x 1740 mm
D-AHU Modular Size 5 - 2080 x 1400 x 1740 mm
D-AHU Modular Size 6 - 2280 x 1400 x 1920 mm
D-AHU Modular Size 7 - 2400 x 1600 x 1920 mm
D-AHU Modular Size 8 - 2450 x 1940 x 2180 mm
D-AHU Modular Size 9 - 2280 x 1940 x 2460 mm
D-AHU Modular Size 10 - 2400 x 2300 x 2570 mm

Platform Compatible Version Certified to
IFC IFC 2X3 1 1.3
Revit Revit 2015 + 3 1.3

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
AccessOptions
Access doors, double-wall polycarbonate portholes
Accessories
n/a
AccessoryOptions
Range of spigots and flexible connections, louvres, control accessories, etc
AntivibrationMountings
Spring anti vibration mounts, tensioning slide and flexible connections
Certification
Eurovent
ComponentsAttenuators
Rectangular silencers as per client specification
ComponentsCoolingCoils
Warter and DX if required
ComponentsDampersMixing
Aluminium, galvanized and stainless steel as per client specification
ComponentsDampersShutOff
Aluminium, galvanized and stainless steel as per client specification
ComponentsFans
Centrifugal, direct drive, external drive, EC as per client request
ComponentsFilters
As per client specification
ComponentsHeatRecovery
Thermal wheel, plate heat exchanger, RAR coil, 3 way mixing dampers,and horse shoe heat pipe as per client specification
ComponentsHumidifiers
Evaporative, direct steam, atomizing and adiabatic as per client specification
ComponentsPreheaters
Electric, low temperature hot water, direct/indirect gas heater and DX as per client specification
ComponentsReheaters
Electric, low temperature hot water, direct/indirect gas heater and DX as per client specification
Construction
Double skin
ControlOptions
Optional sensors to regulate temperature, humidity,air quality, inverted drives, regulation valves, damper actuators, safety and control devices
DirectionOfAirflow
Horizontal
DutyAirVolume
n/a
DutyDischargeVelocity
n/a
DutyExternalResistance
n/a
DutySoundPowerLevel
n/a
Environment
External or internal
FanOptions
Forward bladed fan, backward bladed fan, plug fan
FilterOptions
Pleated, flat, rigid bag, soft bag, high efficiency, active carbon absorption, active carbon deodorizing
FlexibleConnections
Optional flexible connections
HeatRecoveryOptions
Heat wheel (sensible or enthalpy type), cross-flow, run-around coils
HumidificationOptions
Surface evaporation, water spray, steam,atomized
MethodOfSupport
Formed channel support
PanelInsulationOptions
Polyurethane or mineral wool
PositionsForMaintenanceAccess
Access doors
RecommendedAirVelocity
2.5 m/s for units including cooling coils
SizeOptions
Range of 27 fixed sizes, as well as custom sizes through increments of 50 mm
SpecificFanPowerVerification
n/a
ThermalEfficiencyWinter
n/a
Weight
n/a
Pset_DoorWindowGlazingType
Pset_ElectricalDeviceCommon

More BIM objects

What's Changed?

2/9/2017

Changes to reflect updates to the NBS BIM Object Standard v1.3

  • Removal of Uniclass2 property
  • Addition of Uniclass 2015 properties
  • Addition of COBie Category property value

Objects have also been updated to Revit 2015