Evolution - Powder coating

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Evolution is an exciting development in powder coating design, creating beautiful and striking effects on the metal surface. Evolution finishes reflect the patinas caused naturally by metallic oxidation, ageing and changes in composition.

Evolution powders combine excellent visual detail with high protective performance.

  • Striking designs achieved through using polyester resin systems, and a bit of magic!
  • Excellent corrosion protection and weather resistance.
  • High level of colour and gloss retention.
  • Tactile finish.
  • All powders in the range are Qualicoat class 1 approved or better.
  • Conform to ISO 12206.
Platform Compatible Version Certified to
IFC IFC - 1 2.0
Revit Revit 2017 + 1 2.0

  • Properties and values
  • More BIM objects

Properties and values

COBie
BOS_General
NBS_Data
AcceleratedColourChange
Accelerated weathering ISO 16474-2:2013 1000 hours no significant change in colour or appearance
Adhesion
Dry adhesion cross hatch (ISO 2409) Rating 0, no coating detachment, wet adhesion (ISO 2409) after 1 hour pressure cooker rating 0, no detachment
Application
Architectural aluminium and galvanized steel fabricated components and assemblies, balustrade, balconies, rainscreen, facade and curtain wall, soffit, capping and flashing, trims and decorative elements, louvres and solar shading
AppliedFilmThickness
> 80 microns
AppliedGloss
Heterogeneous texture
Corrosion
For more information please speak to Powdertech Corby Ltd
CuppingTest
Tested to ISO 1520 minimum 5 mm indent, No cracking or detachment
CylindricalMandrelBending
Tested to ISO 1519, 5 mm mandrel, no cracking or detachment
HumidityResistance
1000 hours to ISO 6272-2, <1mm scribe creep. No blistering in excess of 2(S2) to ISO 4628-2
ImpactResistance
Tested to ISO 6272-2 Reverse Impact test, no cracking or detachment
Permeability
No blistering or coating detachment
PowderApplication
Corona discharge system
PreTreatment
Aluminium - Titanium-zirconium (TiZr) non-chrome 6-stage pre-treatment, Galvanized steel - silane (oxsilan) non-chrome 8-stage pre-treatment
ResistanceToBoilingWater
No blistering and no loss of adhesion
ScratchResistance
E2 Pass to BS 3900
SulphurDioxideResistance
24 cycles no infiltration exceeding 1mm from the scribe, no change in colour or blistering in excess of 2(S2) to ISO 4628-3
Weathering
For more information please speak to Powdertech Corby Ltd
Pset_CoveringCommon

More BIM objects