Polymer-modified cementitious mortar are described by characteristics such as third party product certification. An example use may be within a concrete protective coating system.
Showing 1-15 of 15
CD534 polymer modified bedding mortar.
Ideal for bedding mortar for large floor tiles, natural stones or brick pavers, and can also be used to form ramps and falls. Suitable for internal and external areas.
Water-repellent cementitious skimming mortar with a fine-textured, natural finish for concrete and plastic, glass and porcelain coverings.
Two-component flexible cementitious mortar for waterproofing concrete and masonry surfaces subject to negative and positive hydraulic pressure.
Two-component rapid-drying elastic cementitious mortar for waterproofing terraces and balconies, including at low temperatures and on substrates not completely dry.
Single component, ready-to-use cementitious waterproof coating system.
Three-component polyurethane/cement-based mortar for making covings and details.
Three-component polyurethane/cement-based formulate for coating walls and as a finishing coat on polyurethane/cementitious systems for industrial floors.
Three-component, high-strength, easy-to-apply, polyurethane-cement mortar with high resistance to chemicals. For coating industrial floors in layers from 6-9 mm thick.
ARDEX X 32 can be used both internally and externally for bed thicknesses from 3 mm to 30 mm, and it is ideal for fixing uncalibrated natural stone.
ARDEX X 7 R is a rapid setting flexible tile adhesive that allows tiles to be grouted and trafficked just 2 hours after fixing.
ARDEX X 7 R is a rapid setting flexible tile adhesive that allows tiles to be grouted and trafficked just 2 hours after fixing.
A polyurethane and cement-based formula, with high mechanical strength and excellent resistance to chemicals.
A polyurethane and cement-based formula which is highly resistant to chemicals, abrasion and temperatures. It has a high mechanical strength and may be applied at thicknesses from 3-4 mm.
