Plastics sheets.
Showing 1-29 of 29
Multi layer polyethylene membrane specifically designed to perform as VOC, Hydrocarbon and ground gas barrier.
Multi layer polyethylene membrane with a bonded textile for pre-applied application as a waterproof membrane specifically designed to perform as VOC, Hydrocarbon and ground gas barrier.
A flexible, loose-laid gas barrier for use on sites with radon, carbon dioxide and methane ground gas.
Flexible closed cell rubber sheet for thermal insulation of larger diameter pipes and ducts. Suitable for outdoor use and for solar thermal pipework and equipment.
Weed protection fabric for use beneath artificial grass rolls.
JUTA UK PD1700 include a high compressive strength Cuspate High Density Polyethylene (HDPE) drainage core with a geotextile filter geotextile bonded to one side.
Loose laid, damp-proof, gas resistant and hydrocarbon resistant membrane.
JUTA GP®4 – Gas Barrier is a multi-layer, low-density polyethylene membrane, reinforced with a polypropylene reinforcing.
GP® TITANFLEX – Gas and hydrocarbon barrier is a multi-layer, polyethylene membrane.
JUTA GP®1 Gas Barrier is a multi-layer, low-density polyethylene membrane, reinforced with a polypropylene reinforcing grid with an integral aluminium foil.
GP® TITANTANK – Self-adhesive version of the GP® TITANFLEX; composed of self-adhesive with an upper surface finish of GP® TITANFLEX.
GP® TITANBOND is a pre-applied fully bonded waterproofing membrane incorporating the GP® TITANFLEX membrane and a heavy-duty virgin polypropylene geotextile.
Tri-Gas Membrane is a high performance gas membrane for use in situations where resistance to methane, carbon dioxide and/or radon gas is required.
High performance, reinforced, loose laid, damp-proof membrane.
High tenacity virgin fibre polypropylene geotextile fabric.
Reinforced, loose laid, damp-proof and gas resistant membrane. Conforms to BS 8485:2015.
Recycled polyester geotextile fabric.
Schlüter®-DITRA 25 is a polyethylene membrane with a grid structure of square cavities, each cut back in a dovetail configuration and an anchoring fleece laminated to its underside.
Schlüter®-KERDI is a crack bridging waterproof membrane made of soft polyethylene, which has been covered on both sides with a special fleece webbing to anchor the membrane in suitable tile adhesive.
A spun-bonded polyethylene geotextile, this vapour permeable waterpoof membrane is used as a ‘breather’ layer in inverted ballasted flat roofs.
Glass fibre mesh resistant to alkalis, ideal for reinforcing skim coats for repairing facades and installing Mapetherm thermal insulation systems.
Flexible closed cell rubber pipe insulation suitable for outdoor use and for solar thermal pipework. High emissivity surface and in-built vapour barrier minimises thickness for condensation control.
Polyfoam™ Slimline Zero Membrane is a high performance, thermally bonded tri-laminate of polypropylene; spunbonded (outer layers) and microporous (inner layer).
