Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Primers for use with the Bituthene® range of cold applied, self-adhesive waterproof membranes.

 

Features and benefits:

Bituthene® Primer B1:

 

  • Application at temperatures of +5 °C and above.
  • Specifically formulated to provide enhanced adhesion with BITUTHENE® GP membrane.
  • High coverage – Low cost per square metre.
  • Rapid drying.
  • Ideal for winter use.

 

Bituthene® Primer S2:

 

  • All temperature application above -5°C.
  • Green and damp concrete tolerant.
  • Quick drying for fast membrane application.
  • Rubberised formulation for high adhesion.
  • Compatible with BITUTHENE® 4000 and 8000 series.

 

Bituthene® Primer W2:

 

  • Application temperature above 0°C.
  • Damp concrete application.
  • Latex formulation.
  • Water based.
  • Low VOC.
Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

COBie
BOS_General
NBS_Data
Applications
May be applied by a roller or a brush, apply to clean, dirt free, surfaces at a coverage rate of 8-10 m2 per litre, allow the primer to dry 30 minutes or until tack-free, dry time may be longer in cold temperatures, deep puddles of primer should be avoided as this will lengthen drying time
CharacteristicsTestStandard
n/a
CharacteristicsViscosityMaximum
n/a
CharacteristicsVolatileSolventContentMinimum
n/a
Coverage
8-10 m² per litre
Curing
GCP Primer
Storage
All products must be handled and stored consistent with BITUTHENE® Primer B1 methods statement, all product should be stored in a well ventilated space, upright in its original container, Store in dry conditions below 40ºC, store off ground, under tarps or otherwise protected from rain and ground moisture
VOC
≤540g/l
Pset_CoveringCommon

More BIM objects