Bituthene® 8000/ 8000S

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

An advanced self-adhesive water, moisture and gas proofing membrane. The membrane has a unique non-metalized grey solar reflective composite carrier film to reduce heat gain while the membrane is exposed and to easily spot damage prior to placement of overlying construction.

 

Features and benefits:

 

  • Provides effective external protection against most aggressive soils, contaminated ground water and hydrocarbons in suspension.
  • 70 m hydrostatic pressure resistance with ultra low moisture transmission rate.
  • Engineered for strength, flexibility and a smooth finish.
  • Printed overlap line ensures minimum laps.
Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More BIM objects

Properties and values

COBie
BOS_General
NBS_Data
Applications
Brush the membrane onto the surface to ensure good initial bond and exclude air. On high walls it may be necessary to batten fix the membrane to prevent slippage
ApplicationTemperature
-5°C to +35°C
Coverage
9-11 sq m per litre application, (depending on surface porosity and ambient temperature
JointLaps
Minimum laps of 50 mm are recommended
Priming
All surfaces (except under below ground load bearing slabs and PREPRUFE® Membranes) should be primed with one coat of GCPșs solvent based quick drying, damp and green concrete tolerant, BITUTHENE® Primer S2. Primer S2 can be applied by brush or roller. Primer S2 is pink in colour to ensure proper coverage, to aid identification and to avoid substitution of proper recommended primer
ResistanceToHydrostaticHead
>70 m of water
RollSize
1 m x 20 m roll (20 sq m)
Storage
All products must be handled and stored consistent with BITUTHENE® 8000/8000S products methods statement, all BITUTHENE® Membranes should be stored upright, observe one-year shelf life and use on a first in, first out basis, store in dry conditions below 40ºC, store off ground, under tarps or otherwise protected from rain and ground moisture
Subtrate
Monolithic concrete blinding is preferred which should be regular, smooth and free of loose aggregate and sharp protrusions. Ensure all surfaces are free from ice and frost
Thickness
1.5
ThirdPartyProductCertification
BS 8102:2009, BS 8485-2015+A1-2019
Weight
36 kg
Pset_CoveringCommon

More BIM objects