Select regional version:
The object content is configured for use in UK, but it may also be suitable for use in other locations.
Bostik Screedmaster Flow is a two-part, protein and casein free, cementitious underlayment with improved workability for smoothing uneven floors prior to laying decorative floor coverings.
The high flow, easy trowelling compound can be used over most common substrates including concrete, sand/cement screeds, stone, anhydrite screeds, terrazzo and quarry tiles, as well as asphalt and other strong, rigid subfloors.
The moisture tolerant formula enables Bostik Screedmaster Flow to be used to smooth rough textured subfloors prior to the application of Bostik Screedmaster damp proof membranes in buildings incorporating a base DPM.
As Bostik Screedmaster Flow is totally protein and casein free, it's suitable for use in biologically sensitive areas, while the low odour formulation also makes it ideal for use in occupied buildings.
Screedmaster Flow can be used with warm water underfloor heating installations provided a maximum surface temperature of 27°C is not exceeded.
Features and benefits:
| Platform | Compatible | Version | Certified to |
|---|---|---|---|
IFC
|
- | 1 | 2.0 |
Revit
|
2017 + | 1 | 2.0 |
| IfcExportAs |
|
IfcCoveringType |
| IfcExportType |
|
NOTDEFINED |
| ApplicationTemperature |
|
+5°C to +35°C |
| ApplicationThickness |
|
Feather edge to 20 mm (bulk out above 10 mm) |
| Classification |
|
CT-C25-F7 |
| CompressiveStrength |
|
>25 N/mm² |
| Coverage |
|
Approx. 5 m² at 2- 3 mm thickness (20 kg Bag + 4.17 L Polyjerry) |
| DryingTimes |
|
Foot traffic: 1.5 hours (<3 mm thickness) at 20°C, Loose lay floor coverings: 8 hours (<3 mm thickness) at 20°C, Bond textile floor coverings: 12 hours (<3 mm thickness) at 20°C, On non-absorbent subfloors lay floor coverings: 24 hours 3 mm thickness) at 20°C |
| FlexuralStrength |
|
>7 N/mm² |
| Form |
|
Two part bag & bottle |
| GaugingLiquid |
|
S y nthetic Rubber |
| Storage |
|
Unopened, clear of the ground. Cool, dry conditions. Protect from excessive draughts, damp, condensation, dew, etc |
| WorkingTime |
|
20 minutes after mixing, dependent on conditions |
