NBS Plug-in for Autodesk® Revit® v3.12 update is available. Learn more
Self smoothing or pumpable, levelling screed mixes are relatively thin compared with conventional screeds and should be used where the base has good surface regularity and where speed of laying and early drying are important. This type of screed is not generally suitable for laying services in. Cementitious screeds can be cast on to new or existing structural floors and roofs to form smooth and regular substrates for applied finishes or wearing surfaces.
Showing objects most relevant to your location first.
Admixture for floor screeds, renders, concrete repair, bedding and bonding mortars.
Pre-Blended Ultra Rapid Drying Cement for Internal Screeds can be walked on in as little as 3 hours and receive resilient floor coverings in as little 24. It's pre-blended so just add water.
A semi-dry cementitious screed incorporating proprietary additives to produce an early drying, high strength screed.
Pre-packed polymer modified screed for underfloor heating systems.
A semi-dry cementitious screed incorporating proprietary additives to produce an early drying, high strength screed.
Exterior Self-Smoothing Levelling and Resurfacing Compound that withstands light vehicle traffic after only 48 hours.
Ultra Rapid Drying Cement for Internal Screeds can be walked on in as little as 3 hours and receive resilient floor coverings in as little 24.
Self-levelling, ultra-quick hardening mortar with special hydraulic binders, applied at a thickness of 5-40 mm to create abrasion-resistant floors.
Single component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.
Single component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.
Ultra-fast hardening, environmentally friendly, water mixed, truly self-levelling and smoothing compound, for 1-10 mm.
Ultra-quick setting, smoothing, wearing screed for high abrasion-resistant Industrial floor coverings at a thickness from 5-40 mm.
ARDEX A 29 cement for screeds has been developed to perform in real site conditions. Offering application and performance benefits to professional screeding contractors.
Your query has been sent.
A technical consultant from will be in touch soon.
Manufacturers using NBS National BIM Library adhere to our code of conduct.
OmniClass
The creation of BIM objects for the inclusion on the National BIM Library includes Omniclass classification codes and titles.
Copyright © 2014 the secretariat for the OmniClass Development Committee. All Rights Reserved. http://www.omniclass.org/