A welded wire ladder-type reinforcement used to improve the structural performance of masonry walls by providing additional resistance to lateral loads.
The FHR connects the top of a masonry wall to the underside of a structural frame.
The IHR-B provides the necessary restraint to the top of masonry walls and accommodates vertical movement.
The PPB is a stainless steel debonded frame cramp for use at vertical movement joints that abut columns.
The PPS is a debonded stainless steel wall tie for use across movement joints in masonry walls.
A high performance, self-anchoring cast-in channel slot with cavity wall tie.
Channel and tie system for connecting masonry cladding to steel stud framing through insulation board.
The SDB is a stainless steel wall tie for connecting masonry to in-situ structures.
A high performance, self-anchoring cast-in channel slot with shear tie.
The SPB is a plain-ended tie for connecting masonry to in-situ structures.
The ST1 is a stainless steel, heavy duty, Type 1 wall tie for connecting two leaves of a cavity wall.
Low thermal conductivity, basalt-fibre, heavy duty Type 1 TeploTie wall tie for connecting the two leaves of a cavity wall.
Low thermal conductivity, basalt fibre, general purpose Type 2 TeploTie wall tie for connecting the two leaves of a cavity wall.
Low thermal conductivity, basalt-fibre, light duty Type 4 TeploTie wall tie for connecting the two leaves of a cavity wall.
A two-part wall tie for connecting the leaves of cavity wall. One section is built into the blockwork and the other section is fixed as the outer leaf is constructed.
The Staifix HRT4 is a stainless steel, light duty Type 4 wall tie for connecting the leaves of a cavity wall.
The Staifix RT2 is a stainless steel, general purpose Type 2 wall tie for connecting the leaves of a cavity wall.
Flowfast Terrosso is a seamless, decorative, hard wearing acrylic resin floor finish, developed for high traffic retail environments.
A high quality virgin PVC wall cladding system for any hygienic environment, fitted with manufacturers trims that can be both welded and thermoformed.
BioClad® Antimicrobial hygienic cladding Panel containing Biocote silver ion antimicrobial additive.
A high quality rigid PVC decorative wall cladding/lining system suitable for designer led projects and front of house hygienic areas.
Pedestal for raised access flooring. Fully complies with the requirements of the PSA MOB PF2 PS/SPU performance specification.
A complete underfloor heating system incorporating insulation, pipework and associated retaining system and screed.
A complete underfloor heating system incorporating insulation, pipework and associated retaining system and screed.
5 mm thick sheet carpet, manufactured with 85% polypropylene, 10% polyamide and 5% recycled polyester.
10.5 mm thick sheet clean-off carpet, manufactured with 90% polypropylene and 10% recycled polyester.
7.5 mm thick sheet carpet, manufactured with 80% polypropylene, 15% polyamide and 5% recycled polyester.
10.5 mm thick raised rib sheet carpet, manufactured with 85% polypropylene and 15% polyester.
11 mm thick sheet clean-off carpet, manufactured with 90% polypropylene and 10% recycled polyester.
12 mm thick sheet clean-off carpet, manufactured with 90% polypropylene and 10% recycled polyester.
7.2 mm thick sheet, sculptured pile carpet, manufactured with 80% polypropylene, 15% polyamide and 5% recycled polyester.
8.2 mm thick rib sheet carpet, manufactured with 45% polypropylene, 30% polyamide and 25% modacrylic.
6.2 mm thick sheet carpet, manufactured with 80% polypropylene 15% polyamide and 5% recycled polyester.
11.5 mm thick, clean-off sheet carpet, manufactured with 90% polypropylene, 10% recycled polyester.
10 mm thick sheet carpet, manufactured with 90% polypropylene and 10% recycled polyester.
9 mm thick bitumen backed 50 x 50 cm tiles manufactured with 85% polypropylene and 15% polyamide.
