SCATALO DUO - Wall Mounted

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Wall-mounted, double outlet electric vehicle charger with online functionality.
 
Features and benefits:

  • Finished in brushed aluminium with black Perspex panels.
  • Robust and aesthetically pleasing.
  • Suitable for use in all environments.
  • Supports single-phase and three-phase power connection, with output from 2 to 7.4 kW per connector.
  • Load-balancing option: The system automatically down-rates and limits the total consumption of the clustered charging stations according to the maximum set on the master unit.
  • Available in single outlet and floor-standing units (specified separately).

Smart functionality:
Open Charge Point Protocol (OCPP)-compatible, for connection to the Sevadis Cloud online management system, or to OCPP platforms provided by others.
Communications to the internet are available via Wi-Fi, GSM or Ethernet, depending on the availability at each location. Can also be configured with optional integrated load-balancing for ensuring that the incoming electricity supply is not over-loaded from excessive use of the chargers when in a cluster.

Platform Compatible Version Certified to
IFC IFC - 1 2.1
Revit Revit - 1 2.1

  • Properties and values
  • More information
  • More BIM objects

Properties and values

IFC
IfcExportAs
IfcElectricDistributionPoint
IfcExportType
USERDEFINED
COBie
BOS_General
NBS_Data
AcceptableRelativeAirHumidity
5ȓ95%
Altitude
2000 m (maximum)
InputCurrent
16 A,32 A
InputVoltage
2 x 230 V/ 400 V a.c
InterfacesEthernetConnection
RJ-45, 10/100Base-T(X)
InterfacesGSM
2G (850/ 900/ 1800/ 1900 MHz); Micro SIM card
InterfacesRFID
MIFARE cards in compliance with ISO 14443
InterfacesWiFi
802.11 big/n, 2.4 GHz; maximum data transfer speed: 150 MBps; transmitter capacity: 21 dB dB
Mode
3 (refer to BS 7671, part 2)
Mounting
Wall-mounted
NetworkType
TN,TT,IT
OutletType
Type 2, standard sockets 2 x 32 A according to EN 62196-1
Overvoltage
Category III according to EN 60664-1
PedestalWeight
0 kg
PowerOutput
2-7.4kW
PowerSupplyCable
Suggested minimal cross-section: 2.5 mm² (16 A nominal current); 6.0 mm² (32 A nominal current)
ProtectionClass
Class 1
RatedFrequency
50 Hz,60 Hz
ResidualCurrentDevice
Integral part of the RCD device A <30 mA a.c
ShortTimeWithstandCurrent
Effective value <6 kA according to EN 61439-1
Standards
Consult manufacturer
Weight
4.75 kg excluding pedestal
WorkingTemperature
-20 to +55°C
Pset_ElectricalDeviceCommon
Pset_FurnitureTypeCommon

More information

  • NBS specification data
  • More BIM objects