AnconOptima is a standard masonry support system comprising brackets, angles with pre-marked fixing zones and locking wedges.
Loose-fit shelf Masonry Support System designed to give maximum flexibility onsite.
MDC/I is a bespoke stainless steel masonry support system with the support angle at the top of the bracket.
MDC/R is a bespoke stainless steel masonry support system with a reversed angle welded to the bracket
The Staifix HRT4 is a stainless steel, light duty Type 4 wall tie for connecting the leaves of a cavity wall.
The ST1 is a stainless steel, heavy duty, Type 1 wall tie for connecting two leaves of a cavity wall.
The Staifix RT2 is a stainless steel, general purpose Type 2 wall tie for connecting the leaves of a cavity wall.
The PPS is a debonded stainless steel wall tie for use across movement joints in masonry walls.
Low thermal conductivity, basalt-fibre, heavy duty Type 1 TeploTie wall tie for connecting the two leaves of a cavity wall.
Low thermal conductivity, basalt fibre, general purpose Type 2 TeploTie wall tie for connecting the two leaves of a cavity wall.
Low thermal conductivity, basalt-fibre, light duty Type 4 TeploTie wall tie for connecting the two leaves of a cavity wall.
A two-part wall tie for connecting the leaves of cavity wall. One section is built into the blockwork and the other section is fixed as the outer leaf is constructed.
Channel and tie system for connecting masonry cladding to steel stud framing through insulation board.
Shelf system with fixed brackets suitable for extreme loads.
Shelf system with fixed brackets suitable for extreme loads.
Shelf system with fixed brackets suitable for extreme loads.
Shelf system with fixed brackets suitable for extreme loads.
Shelf system with fixed brackets suitable for extreme loads.
A high performance, self-anchoring cast-in channel slot with cavity wall tie.
A high performance, self-anchoring cast-in channel slot with shear tie.
A high performance, self-anchoring cast-in channel slot with debonded tie for use at vertical movement joints that abut concrete columns.
The PPB is a stainless steel debonded frame cramp for use at vertical movement joints that abut columns.
New build cavity wall tie for securing outer leaf masonry to inner leaf blocks or interlocking panels.
The SDB is a stainless steel wall tie for connecting masonry to in-situ structures.
The SPB is a plain-ended tie for connecting masonry to in-situ structures.
Masonry Support & Brick Slip Bolt-Up Technology combine to produce the Brick On Soffit System.
The FHR connects the top of a masonry wall to the underside of a structural frame.
Ancon Windposts span vertically between floors to provide lateral support for panels of masonry.
The IHR-B provides the necessary restraint to the top of masonry walls and accommodates vertical movement.
B.O.S.S. A1 is a lightweight, carbon neutral, prefabricated brick slip soffit system designed to be quickly and easily bolted to IG’s Welded Masonry Support.
The revolutionary Ancon Thermal Windpost (TWP2) is designed to span vertically between floors, to provide additional lateral support for panels of masonry.
Ancon Windposts span vertically between floors to provide lateral support for panels of brickwork.
Ancon Windposts span vertically between floors to provide lateral support for panels of brickwork.
