Cetus Classic - Panel

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Tubular frame UR 350 steel mesh and UR SP all steel panel system - is a light-duty, system that is suitable for creating storage cages and enclosures within well protected environments where a low level of security is required. The system is also ideal for creating inner partitioning walls within a secure storage application when used in conjunction with the Troax UX 450, UR SP and UX 550 panels. The UR 350 panels has a 50 x 50mm mesh aperture making it difficult for a hand to reach through the panel the eight different panel widths provide versatility to configure cages to suit most applications. Available in powder coated and hot-dip galvanised finishes. Alternatively greater privacy and security can be achieved by using the UR SP solid steel panel version which is available in six different widths but only in a painted finish. The system is largely boltless being secured from the inside using plates and self drilling screws.

Platform Compatible Version Certified to
IFC IFC 2X3 2 1.3
Revit Revit 2016 + 3 2.0

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
Accessories
Cut profile, END profile UR/UX, U-profile UR, to give versatility of on-site installation
AdditionalApertures
Normally cut on site - flexible rubber capping can be provided to cap cut wires, alternatively cut outs can be pre-cut or cut and welded prior to delivery
Applications
Storage spaces - commercial, domestic, industrial, military
CableManagementAndOutlets
Cable trays can be provided as an option
CeilingJointTreatment
Connected using brackets and self-drill screws from the inside
CeilingMethodOfSupport
Self supported on the vertical wall panels and posts, up to 3000mm span thereafter support provided using 'C' section beams
CeilingPanels
The same panels can be used to form a roof over the enclosures
CeilingType
Mesh panels
DeflectionAllowanceMaximumFloor
n/a
DeflectionAllowanceMaximumHead
n/a
DeflectionAllowanceMaximumVerticals
n/a
DoorArrangementDoorFrames
See door options
DoorArrangementDoorLeafsType
See door options
DoorArrangementDoorLeafsVisionPanels
n/a
DoorArrangementType
See door options
FrameFixing
n/a
FrameSize
Tubular frame - UR 350 welded mesh panels, UR SP steel sheet panels: 19 x 19 x 1.0mm
FramingJunctionsCorners
A largely boltless system using brackets fixed by self-drill screws on the inside to give an externally tamper proof finish
GlazedPanelsAdditionalFeatures
n/a
GlazedPanelsIntegralBlinds
n/a
GlazedPanelsType
n/a
Hardware
n/a
HeightOptions
2200mm only infill above if required uses the same panels horizontally fixed to ceiling supports
MeshSizeOptions
UR 350 welded mesh: 50 x 50mm (2.5 x 2.5mm wire) only
PanelPartitionTypeOptions
See frame and mesh options
PerimetersSkirtingsSills
n/a
PostSize
n/a
Seals
n/a
SolidPanelsColourOptions
Grey - RAL 7037 & Hot-Dip Galvanised, other RAL colours by special order
SolidPanelsCoreOptions
n/a
SolidPanelsFinishOptions
Powder coated paint
SolidPanelsThickness
Frame - UR: 30mm
SolidPanelsType
Carbon steel tubular frame with fully welded mesh face
ThirdPartyAccreditation
n/a
Trims
U' Profile can be used to cap the panels, provided in a pre-galv or painted to match the panel finish
Weight
UR 350 - 2.9kg - 7.0kg/m², UR SP 5.3kg - 11.7kg/m²,depending on panel width
WidthOptions
200mm, 300mm, 500mm, 700mm, 800mm, 1000mm, 1200mm, 1500mm UR SP maximum 1200mm
Pset_WallCommon

More information

  • NBS specification data
  • More BIM objects

    What's Changed?

    16/08/2018

    Object upgraded to NBS BIM Object Standard v2.0.

    19/01/2017