Structural glazing is an assembly of frameless glass components as a vertical or near vertical (slope of less than 15° from vertical) non loadbearing building façade. There are three basic methods of support: suspended, point-fixed and stacked. All dead and live loads are transferred via connections to the building structure. Glazing is attached by assembly fixings to glass fins or a secondary support structure and thereby back to the building structure. Assembly fixings are usually stainless steel and allow the glass to move relative to the secondary structure via flexible washers, spring plates or swivel joints. Bolt fixings can project from the external glass surface or be countersunk flush.
Showing objects most relevant to your location first.
Structural glass wall system with countersunk bolted fixings. The object has a number of parametric values to control the appearance of the panel
Structural glass wall system with projecting bolted fixings. The object has a number of parametric values to control the appearance of the panel
Your query has been sent.
A technical consultant from will be in touch soon.
Manufacturers using NBS National BIM Library adhere to our code of conduct.
The creation of BIM objects for the inclusion on the National BIM Library includes Omniclass classification codes and titles.
Copyright © 2014 the secretariat for the OmniClass Development Committee. All Rights Reserved. http://www.omniclass.org/