NBS Source
I'm a manufacturer

RIW Flexiseal Pro - Waterproof Coating System

Verified by manufacturer 11 months ago

RIW

Flexible, resin-based, cold applied, liquid waterproof coating system.

Jump to:
BIM object icon
+44 (0)1753 944200 Website

Application

  • Concrete, masonry and steel substrates.
  • Basement and sub-structures.
  • Ground floor DPM.
  • Plant rooms and containment bunds.
  • Superstructures.

A range of ancillary products for use with Flexiseal Pro are available to be specified separately.

Description

A two-pack solvent free polymer modified epoxide coating which cures to give a continuous tough but flexible waterproof coating.

Used where a high performance tanking, damp proof membrane or containment system is required, the product can be applied in one single coat to horizontal areas and two coats to vertical areas. All surfaces should be sealed with one single coat of RIW Flexiseal Pro Primer, to condition the substrate and aid adhesion of the coating.


Primer:

RIW Flexiseal Pro Primer is a two-pack solvent free black liquid modified epoxide surface conditioner that can be applied to damp surfaces.


Features and benefits:

  • Water and water vapour barrier.
  • Colour coded system for quality control.
  • Seamless and fully bonded coating.
  • Tough and flexible, able to accommodate differential movement.
  • Cold applied by hand or spray.
  • Simplifies application to irregular profiles and complex details.
  • Can be applied to damp surfaces.
  • High substrate adhesion.
  • Good chemical and UV resistance.
  • Effective barrier to carbon dioxide and methane.
  • CE marked.

General information

Color

Red

Black

Grey

Material

Epoxy

Warranty description

-

Manufacturer guidance

RIW Limited’s waterproofing products will, subject to normal service conditions, provide an effective barrier to the transmission of liquid water and water vapour for the life of the building in which they are incorporated., The products must be installed in accordance with RIW written instructions, and following installation must not be subjected to any damage or long-term UV exposure.

Uniclass

Pr_35_31_68_47 Liquid tanking resinsPrimary

CAWS

J30/10 Cold-applied damp-proofing

J30/110 Cold-applied tanking

J30/130 Cold-applied damp-proofing

J31/353 Waterproof coating

Specification data - Liquid tanking resins

Composition

Epoxy.

Product Reference

RIW Flexiseal Pro

Primer

RIW Flexiseal Primer.

Colour

Primer: Black; Membrane coating: Red.

Coats

Horizontally: One coat; Vertically: Two coats.

Coverage per coat

Horizontally: 1 m²/kg; Vertically: 2 m²/kg; Primer coverage: 4 m²/L.

TensileStrength

11.6 N/mm².

Curing time

Six hours (minimum).

Chemical resistance

Resistant to brine, dilute mineral acids, dilute alkali solutions, diesel and petrol, anti-freeze, lubricating oil, white spirit and 50% caustic soda.

Application temperature

5–35°C.

BIM objects

BIM object icon

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit

Revit 2016

2

IFC

IFC2X3

1

Literature

RIW Flexiseal Pro

RIW Flexiseal Pro