PermaRock Phenolic External Wall Insulation Systems

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

The PermaRock Phenolic external wall insulation (EWI) system incorporates high performance rigid cellular phenolic foam insulation boards.

The lightweight, low thermal conductivity insulation enables high levels of thermal performance to be achieved utilising thinner sections of insulation.

The system is an ideal solution for buildings that cannot increase their footprint significantly due to encroachment onto pavements, passageways, proximity to an adjacent property, or are located within conservation areas.

Features:

  • Higher levels of thermal performance for thinner levels of insulation
  • Low density and lightweight
  • Can assist in achieving Code for Sustainable Homes Levels 4-6, BREEAM and Passivhaus Standards
  • Class O fire rating
  • Ecopoints Score of 0.15 (m²) – Very Good Rating
  • UKAS Accredited (BRE Cert No. 158/12)
Platform Compatible Version Certified to
IFC IFC 2X3 1 1.3
Revit Revit 2016 + 3 2.0

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

IFC
IfcExportAs
IfcCoveringType
IfcExportType
INSULATION
COBie
NBS_General
NBS_Data
Application
Trowel or machine applied
ApplicationConditions
Minimum temperature for application and drying: + 5°C for product, substrate and air
BaseCoat
PermaRock Bedding Mortar
BeadsAndTrims
n/a
Certification
BRE Accrediated (Cert No. 158/12)
CertifiedEffectiveLifeMinimum
30+ years
Classification
n/a
CoefficientOfWaterAbsorption
w < 0.2="">
ColourOptions
n/a
CompressiveStrengthMinimum
n/a
Consumption
Bonding of insulation boards: Approximately. 3.5-4.5 kg/m²
CrossSection
n/a
CuringTime
2-3 days
Density
1400 kg/m³
DimensionsMeshSize
4.5 x 5.4 mm
DimensionsStrandSize
n/a
DryingTime
24 hours
Edges
n/a
Elongation
Warp: Maximum 5%, Weft: Maximum 4.5%
EvidenceOfCompliance
n/a
FaceSize
600 x 1200 mm
Facing
n/a
FireBarriersFixings
n/a
FireBarriersMaterial
n/a
Form
n/a
FreezeThawBehaviour
Stable to -20°C
GrainSize
1.5 mm
HygrothermalPerformance
Passes MOAT 22
ImpactResistance
4-40 J
InsulationAdditionalMechanicalFixings
Washers
InsulationAdhesive
PermaRock Adhesive
InsulationMaterial
PermaRock Phenolic
InsulationThermalConductivity
0.023 W/mK (15-24 mm), 0.021 W/mK (25-44 mm), 0.020 W/mK ( ≥45 mm)
InsulationThickness
80
InsulationThicknessOptions
20-140 mm in 10 mm increments
MovementJointsAccessories
n/a
MovementJointsFormWith
n/a
MovementJointsSealant
n/a
OpenTimeMinimum
Approximately 2-3 hours, depending on water content and weather conditions
Packaging
25 kg sacks
Pattern
n/a
Primer
PermaRock K & R Primer
ProtectiveCoating
n/a
RecycledContent
n/a
Reinforcement
PermaRock Armoured Mesh
RenderApplication
n/a
RenderCarrierOrReinforcementFixings
n/a
RenderCarrierOrReinforcementMaterial
PermaRock Armoured Mesh
RenderCarrierOrReinforcementMeshSize
4.5 x 5.4 mm
RenderColourOptions
White, 3D-Plus Range, A1 Colour Range, colour matching options also available
RenderDecorativeFinish
n/a
RenderMaterial
PermaRock Silicone K15
RenderMaterialOptions
Brick Effect Render, Acrylic K&R, Silicone K&R, Silicone Ultra K&R, Mineral K&R, Metallic Render, Stone Chip Render, Brick Slip Adhesive, Dashing Base Coat
SamplesRequired
n/a
ShearStrengthMinimum
n/a
ShelfLife
6 months after manufacture date
Storage
Store off the ground, dry and protected from moisture
SuitableSubstrates
Brickwork, dense + no-fines concrete, blockwork, metal frame, SIPS
SuitableSystems
PermaRock EWI Systems, PermaRock Exterior Render System
TemperatureRange
3°C and above
TensileStrength
Warp: 9450 N/5 cm, Weft: 7200 N/5 cm
ThermalConductivity
<1>
ThermalConductivityMaximum
n/a
ThicknessOptions
20-140 mm in 10 mm increments
ThirdPartyCertification
n/a
ThirdPartyProductCertification
n/a
TotalVOCsMaximum
n/a
Uses
Suitable for buildings <18 m,="" residential,="" education,healthcare,="" public="" buildings,="">
WaterResistanceClass
Class 4
WaterVapourPermeability
>15 MNs/g
Weight
735 g/m²
WindResistance
PermaRock Bedding Mortar
WorkingTemperature
PermaRock adhesive should only be used when the material , surface air temperature at the workface are 3°C and above on a rising thermometer
YarnCount
Warp: 14 threads/10 cm), Weft: 12 threads/10 cm
Pset_CoveringCommon

More BIM objects

What's Changed?

13/02/2019

Minor object standardisation.

24/07/2018
19/01/2017