MEGAFLO Eco Solar Indirect

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Unvented indirect hot water cylinders which use a special solar coil in the base of the cylinder that's designed to ensure maximum heat input and efficiency.

The cylinder itself benefits from sophisticated Duplex stainless steel cylinder construction for maximum strength and corrosion resistance.

High-performance polyurethane foam is fitted between the inner vessel and outer casing for the best possible heat insulation.

Product variations in this file:

  • MEGAFLO Eco Solar - 190i
  • MEGAFLO Eco Solar - 210i
  • MEGAFLO Eco Solar - 250i
  • MEGAFLO Eco Solar - 300i
Platform Compatible Version Certified to
IFC IFC 2X3 2 1.3
Revit Revit 2016 + 3 2.0

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
Accessories
Swept tee for direct secondary return (94:970:033), Titanium indirect control assembly and immersion heater accessory pack (95:970:554)
AuxiliaryCoilType
22 mm diameter stainless steel
Connections
Inlets and outlets: ¾" BSP male parallel and 22 mm compression fittings; Indirect primary coil and solar coil: ¾" BSP male parallel and 22 mm compression fittings; U+00BD" temperature and pressure relief valve: 15 mm compression outlet
ErPRating
C
Fixing
Floor fixed
FlowRate
≤72 L/min
HeatUpTime
21 minutes
ImmersionHeater
One long-life 3 kW Superloy 825 alloy sheathed element with integral thermostat and thermal cut-out
OutletTemperatureRange
12-68°C
SafetyFeatures
High limit thermal cut-out set to operate at 85°C, wired in series with two-port motorized valve to provide primary over-temperature protection, temperature and pressure relief valve factory set to operate at 10 bar and 90°C, factory-fitted thermal cut-out for integration into a solar circuit
SolarCoilSurfaceArea
1.1 m²
SolarCoilType
25 mm diameter stainless steel
SupplyPressureRange
1.5-16.0 bar
ThermalInsulation
60 mm thick CFC/HCFC free (ODP zero) polyurethane
ThirdPartyCertification
Kiwa approved, Nemko approved
Pset_ElectricalDeviceCommon
Pset_TankTypeCommon
Pset_TankTypePreformed

More information

  • NBS specification data
  • More BIM objects

    What's Changed?

    12/02/2019

    Minor object standardisation.

    13/07/2018
    9/03/2017