MEGAFLO Eco Solar Direct

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Unvented direct hot water cylinders which use a special solar coil in the base of the cylinder that's designed to ensure maximum heat input and efficiency.

The cylinder itself benefits from sophisticated Duplex stainless steel cylinder construction for maximum strength and corrosion resistance.

High-performance polyurethane foam is fitted between the inner vessel and outer casing for the best possible heat insulation.

Product variations in this file:

  • MEGAFLO Eco Solar - 170D
  • MEGAFLO Eco Solar - 210DD
  • MEGAFLO Eco Solar - 260DD
  • MEGAFLO Eco Solar - 300DD
Platform Compatible Version Certified to
IFC IFC 2X3 2 1.3
Revit Revit 2016 + 3 2.0

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
Accessories
Swept tee for direct secondary return (94:970:033)
Connections
Inlets and outlets: ¾" BSP male parallel and 22 mm compression fittings; Indirect primary coil and solar coil: ¾" BSP male parallel and 22 mm compression fittings; U+00BD" temperature and pressure relief valve: 15 mm compression outlet
ErPRating
C
Fixing
Floor fixed
FlowRate
≤72 L/min
HeatUpTime
75 minutes
ImmersionHeater
Two 3 kW titanium elements with integral thermostat and thermal cut-out
OutletTemperatureRange
12-68°C
SafetyFeatures
Manually resettable cut-out on heating element set to operate at 85°C, temperature and pressure relief valve factory set to operate at 10 bar and 90°C, factory-fitted thermal cut-out for integration into a solar circuit
SolarCoilSurfaceArea
1.1 m²
SolarCoilType
25 mm diameter stainless steel
SupplyPressureRange
1.5-16.0 bar
ThermalInsulation
60 mm thick CFC/HCFC free (ODP zero) fire retardant expanded polyurethane, foam
ThirdPartyCertification
Kiwa approved, Nemko approved
Pset_ElectricalDeviceCommon
Pset_TankTypeCommon
Pset_TankTypePreformed

More information

  • NBS specification data
  • More BIM objects

    What's Changed?

    12/02/2019

    Minor object standardisation.

    13/07/2018
    9/03/2017