MEGAFLO Eco Indirect

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Unvented indirect hot water cylinder designed and manufactured to a very high quality using the latest manufacturing techniques.

They boast numerous innovative features designed to ensure high levels of operating efficiency. The combination of its lightweight and very strong construction makes MEGAFLO Eco easier to handle on site.

Product variations in this file:

  • MEGAFLO Eco - 70i
  • MEGAFLO Eco - 145i
  • MEGAFLO Eco - 170i
  • MEGAFLO Eco - 210i
  • MEGAFLO Eco - 250i
  • MEGAFLO Eco - 300i
Platform Compatible Version Certified to
IFC IFC 2X3 2 1.3
Revit Revit 2015 + 2 1.3

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
Accessories
Swept tee for direct secondary return (94:970:033), Titanium indirect control assembly and immersion heater accessory pack (95:970:554)
Connections
Inlets and outlets: ¾" BSP male parallel and 22 mm compression fittings; Coil: ¾" BSP male parallel and 22 mm compression fittings; U+00BD" temperature and pressure relief valve: 15 mm compression outlet
ErPRating
B
Fixing
Floor fixed
FlowRate
≤72 L/min
HeatUpTime
24 minutes
ImmersionHeater
One long-life 3 kW Superloy 825 alloy sheathed element with integral thermostat and thermal cut-out
OutletTemperatureRange
12-68°C
PrimaryCoilSurfaceArea
0.72 m²
PrimaryCoilType
22 mm diameter stainless steel
RecoveryTime
17 minutes
SafetyFeatures
High limit thermal cut-out operates at 90°C, wired in series with two-port motorised valve, temperature and pressure relief valve factory set to operate at 10 bar and 90°C
SupplyPressureRange
1.5-16.0 bar
ThermalInsulation
60 mm thick CFC/HCFC free (ODP zero) polyurethane
ThirdPartyCertification
Kiwa approved, Nemko approved
Pset_ElectricalDeviceCommon
Pset_TankTypeCommon
Pset_TankTypePreformed

More information

  • NBS specification data
  • More BIM objects

    What's Changed?

    9/03/2017

    Changes to reflect updates to the NBS BIM Object Standard v1.3

    • Removal of Uniclass2 property
    • Addition of Uniclass 2015 properties
    • Addition of COBie Category property value

    Objects have also been updated to Revit 2015