Electromax Combined Electric Boiler and Hot Water Store

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

Electromax is the combination of an electric flow boiler with a hot water storage cylinder and a pre-plumbed, factory-fitted circulating pump. Electromax can provide wet central heating and a hot water supply, both at the same time if required, with only a mains electrical connection and cold water supply needed.

The integral duplex stainless steel unvented cylinder has a 180 Litre capacity, delivering mains pressure showering, fast-filling baths and a balanced supply to multiple tap outlets. Electromax is designed for sealed systems and is compact in size, easily fitting into a standard domestic airing cupboard, and is available in two domestic kW sizes.

Included in object:

  • Electromax 6kW – Radiator.
  • Electromax 9kW – Radiator.
  • Electromax 6kW – Underfloor.
  • Electromax 9kW – Underfloor.
Platform Compatible Version Certified to
IFC IFC 2X3 2 1.3
Revit Revit 2016 + 3 2.0

  • Properties and values
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
Accessories
Programmable room thermostat (TP5000)
BoilerElectricalInput
6 kW @ 240 V, 5.5 kW @ 230 V
Connections
22 mm compression type fittings
CylinderExpansionVessel
18 L/ 3.5 bar
CylinderPressureRange
3.5-6 bar
EnvironmentalProductDeclaration
n/a
ErPRating
D/D
Fixing
Floor
ImmersionHeater
3 kW @ 240 V, 2.8 kW @ 230
OperatingPressure
Boiler: 1 bar
PressureReliefValve
Boiler: 3 bar, Cylinder:10 bar
Rating
6 kW
StandingHeatLoss
1.95 kWh/24h
ThermalInsulation
40 mm
ThirdPartyCertification
Kiwa approved
WaterHeatingEnergyEfficiency
0.36
Pset_BoilerTypeCommon
Pset_ElectricalDeviceCommon
Pset_TankTypeCommon

More BIM objects

What's Changed?

13/07/2018

Object upgraded to NBS BIM Object Standard v2.0.

13/11/2017