VisionVent Powered Operation Rooflight

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

The VisionVent is a hinged rooflight designed to provide natural ventilation whilst reducing internally visible operating mechanisms. The thermally broken framework is supplied dual colour as standard RAL7015 outer / RAL9010 inner.

The VisionVent is available as a manual option with visible internal screw jack mechanism or it can be supplied with powered mechanisms hidden within the frame, these units being driven open using chain mechanisms or dual scissor hinges providing a more stable platform.

This rooflight can be supplied with a laminated inner pane which has been attack tested to LPS2081 Issue 1: 2015 and rated Secured by Design.

Platform Compatible Version Certified to
IFC IFC 2X3 1 1.3
Revit Revit 2016 + 2 2.0

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
Accessories
Rain sensor, Thermostat, BMS integration, RITEC coating, Battery back up, Remote Control
CavityType
20 mm black silicone sealed warm edge argon filled
Certification
SBD approved, Loss Prevention Certification Board certified (glass specification applies)
ComponentNumber
n/a
Configuration
Solo or integrated
DriveMechanism
Motor-driven scissor linkage mechanism with encoder feedback
Form
Flat rectangular
FrameFinishCoating
Qualicoat approved polyester powder coating
FrameFinishColour
RAL 7015 Grey (Outer), RAL 9010 White (Inner)
FrameFinishTexture
n/a
FrameMaterial
Aluminium
GlazingOptions
Double, triple
GlazingOrInfillCoating
Low-e coating
GlazingOrInfillConstruction
Double glazed
GlazingOrInfillType
Insulating glass unit
InnerPaneType
6 mm heat soak tested soft low e toughened
IntermediatePaneType
n/a
MaximumArea
2.5 m²
MaximumSize
2400 mm width (hinge) 2365 mm span
MinimumSize
845 mm width (hinge) 808 mm span
OpeningAngle
Variable
OpeningType
Hinged for venting
OperationControl
Intelligent wall switch as standard
OperationType
External 24 V, 300 W mains powered supply
OuterPaneType
6 mm heat soak tested toughened
PitchAngleRange
3-70°
RooflightWeight
73 kg (1200 x 1200 mm)
Seals
Combination of silicone, TPE bubble seals and dual-hardness EPDM gasket
Security
Mechanism cannot be disconnected from lid whilst closed, mechanisms cannot be back driven
StructuralKerb
To builders kerb (by others) min 100 mm wide, 150 mm high, 3° pitch
ThermalBreak
true
WholeWindowUValue
1.9 W/m²K Uw
WindowNumber
n/a
Pset_DoorWindowGlazingType
Pset_ElectricalDeviceCommon
Pset_WindowCommon

More information

  • NBS specification data
  • More BIM objects

    What's Changed?

    10/07/2018

    Object upgraded to NBS BIM Object Standard v2.0.