BEMO N65 Standing Seam Profile

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

The high seam ensures excellent load-bearing capacity. The panel can be employed in all climate zones and for all building types.

A rubber seal can be integrated into the standing seam for added protection against water ingress. This makes the panel suitable for roofs with a pitch of less than 1.5°, and for deployment in areas with extreme wind, snow and sand loads.

Platform Compatible Version Certified to
IFC IFC 2X3 2 1.3
Revit Revit 2016 + 5 2.0

  • Properties and values
  • More information
  • More BIM objects
  • What's Changed?

Properties and values

COBie
NBS_General
NBS_Data
AcousticInsulationOptions
Silent acoustic fleece can be attached to the underside of all panels
AdditionalRequirements
n/a
CoatingOptions
BEMO-FLON, PVDF, polyester, EcoCleanTM from Alcoa, ARS
CoverWidthOptions
Standard: 305 mm, 333 mm, 400 mm, 500 mm, 600 mm, Custom : 100 - 1000 mm. 1000 mm (maximum)
EnvironmentalProductDeclaration
n/a
MaterialOptions
Aluminium, Steel, Stainless steel, Copper, Titanium
MaterialThicknessOptions
Aluminium: 0.8 - 1.2 mm, Steel: 0.63 - 0.75 mm, Stainless steel: 0.5 - 0.7 mm, Copper: 0.8 - 1.0 mm, Titanium: 0.7 - 1.0 mm
MinimumRoofPitch
1.50° (2.60%) with penetrations / overlap joints welded, 2.90° (5.00%) with penetrations / overlap joints mastic sealed
MinimumRoofPitchOptions
Aluminum, stainless steel, copper: 1.50° (2.60%) with penetrations / overlap joints welded, 2.90° (5.00%) with penetrations / overlap joints mastic sealed, Steel, titanium zinc: 3.0° (5.24%) with no penetrations / overlaps, 5.0° (8.75%) with penetrations / overlap joints mastic sealed, Aluzinc: 1.50° (2.60%) with no penetrations / overlaps, 2.90° (5.00%) with penetrations / overlap joints mastic sealed
ProfileCrowns
n/a
ProfileForm
Standing seam
ProfileHeight
65 mm
ProfilePitch
n/a
ProfileTroughs
n/a
ProfileValleys
n/a
RibOptions
Parallel to panel curvature, centered and straight, or no ribs
RubberSealOptions
Can be integrated into all BEMO N65 panels
Side1OuterColour
n/a
Side1OuterFactoryFinishes
n/a
Side1OuterFactoryFinishOptions
Stucco, brushed, anodized, aluzinc, pre-weathered, plated
Side2InnerColour
n/a
Side2InnerFactoryFinishes
n/a
Side2InnerFactoryFinishOptions
n/a
Standard
BS EN 508-2
Pset_CoveringCommon

More information

  • NBS specification data
    Case studies and technical literature
  • More BIM objects

    What's Changed?

    10/03/2017

    Changes to reflect updates to the NBS BIM Object Standard v1.3

    • Removal of Uniclass2 property
    • Addition of Uniclass 2015 properties
    • Addition of COBie Category property value

    Objects have also been updated to Revit 2015