BASF - MasterSeal Traffic 2205 (BBA Approved)

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

MasterSeal Traffic 2205 is a liquid applied, crack bridging car park deck waterproofing system based on advanced polymeric materials. It consists of a substrate primer, a spray applied elastomeric polyurethane/polyurea hybrid waterproofing membrane, a tough hard wearing polyurethane wear coat and choice of top coats.

MasterSeal Traffic 2205 is intended for use on exposed decks and ramps where it’s enhanced crack bridging properties provide complete protection from water, de-icing salts and other potentially damaging contaminants. MasterSeal Traffic 2205 is also used on intermediate decks over offices, sales rooms, store rooms etc.

  • Separate waterproofing membrane and wear coats for maximum crack bridging capability 
  • Easy application to complicated details
  • Excellent wear and skid resistance
  • UV and weather resistant 
  • Low dirt retention and easy to clean
Platform Compatible Version Certified to
IFC IFC 2X3 1 1.3
Revit Revit 2015 + 1 1.3

  • Properties and values
  • More information
  • More BIM objects

Properties and values

IFC
IfcExportAs
IfcCoveringType
IfcExportType
UNDEFINED
COBie
NBS_General
NBS_Data
AbrasionResistance
≤3000 mg
AdhesionStrength
≥ 1.5 N/mm²
C02Permeability
Sd >50
CarrierMembraneAttachment
n/a
CarrierMembraneType
n/a
Composition
substrate primer, a spray applied elastomeric polyurethane/polyurea hybrid waterproofing membrane, a tough hard wearing polyurethane wear coat and choice of top coats
ImpactResistance
Class l
LiquidAppliedWaterproofCoatingReinforcement
n/a
LiquidAppliedWaterproofCoatingSurfaceProtection
polyaspartic
LiquidAppliedWaterproofCoatingType
polyurethane
PreparationExistingSubstrates
MasterSeal Traffic 2205 must be applied to a clean, dry substrate free from dust, dirt, oil, grease and other contamination. This is best achieved by mechanically preparing the substrate using captive shot-blasting (Blastrac), floor plane (Von Arx) and diamond-grinding as required
PreparationHorizontalWork
mechaincal preparation by captive shot balsting, diamond grinding or floor planing
PreparationSkirtingsAndVerticalWork
mechanical preparation by grinding
SkidResistance
Class ll
SystemAccessories
n/a
ThicknessRange
3-4 mm
WaterVapourPermeability
Class ll
Pset_CoveringCommon

More information

  • NBS specification data
  • More BIM objects