A welded wire ladder-type reinforcement used to improve the structural performance of masonry walls by providing additional resistance to lateral loads.
The FHR connects the top of a masonry wall to the underside of a structural frame.
The IHR-B provides the necessary restraint to the top of masonry walls and accommodates vertical movement.
The PPB is a stainless steel debonded frame cramp for use at vertical movement joints that abut columns.
The PPS is a debonded stainless steel wall tie for use across movement joints in masonry walls.
A high performance, self-anchoring cast-in channel slot with cavity wall tie.
Channel and tie system for connecting masonry cladding to steel stud framing through insulation board.
The SDB is a stainless steel wall tie for connecting masonry to in-situ structures.
A high performance, self-anchoring cast-in channel slot with shear tie.
The SPB is a plain-ended tie for connecting masonry to in-situ structures.
The ST1 is a stainless steel, heavy duty, Type 1 wall tie for connecting two leaves of a cavity wall.
Low thermal conductivity, basalt-fibre, heavy duty Type 1 TeploTie wall tie for connecting the two leaves of a cavity wall.
Low thermal conductivity, basalt fibre, general purpose Type 2 TeploTie wall tie for connecting the two leaves of a cavity wall.
Low thermal conductivity, basalt-fibre, light duty Type 4 TeploTie wall tie for connecting the two leaves of a cavity wall.
A two-part wall tie for connecting the leaves of cavity wall. One section is built into the blockwork and the other section is fixed as the outer leaf is constructed.
The Staifix HRT4 is a stainless steel, light duty Type 4 wall tie for connecting the leaves of a cavity wall.
The Staifix RT2 is a stainless steel, general purpose Type 2 wall tie for connecting the leaves of a cavity wall.
A ¾” thermostatic mixing valve incorporating Radatherm service-free cartridge, check valves and strainers.
Fully thermostatic bath and shower mixer, TMV 3 approved for both low and high pressure installation and featuring a patented automatic safe temperature adjustment on the shower.
Contemporary design bath/shower kit, featuring patented Category 5 compliant security hose retaining ring.
Bath/shower fittings including 3 mode adjustable chrome handset, slide bar, 1.5 m hose and soap dish.
A rigid shower fitting with swivel shower head, polished chrome finish for connection to concealed pipework.
Slide rail shower kit, supplied complete with 1.25 m flexible hose, clamp bracket assembly, slide bar, end supports, soap dish, hose retaining ring and adjustable spray handset.
Exposed thermostatic shower control, offering separate temperature and flow control. Incorporating Radatherm service-free cartridge. Supplied with Mira Response fittings.
Robust shower rail kit, supplied complete with 1.25 m flexible hose, clamp bracket assembly, hose retaining ring and adjustable spray handset.
Ligature resistant active infra-red sensor, designed to be used with the Rada Pulse Control Box System and LR Head.
Satin finish stainless steel panel with hot and cold water pipe entry connecting to a Meynell V8/3 TMV3 approved thermostatic mixing valve, having single sequential flow and temperature control.
Wall mounted spout with 150 mm throw with polished chrome finish and fitted with 5 litres/minute flow regulator.
Wall mounted spout with 150 mm throw with polished chrome finish and fitted with 5 litres/minute flow regulator.
Wall mounted spout with 190 mm throw with polished chrome finish and fitted with 5 litres/minute flow regulator.
Deck mounted spout with 100 mm throw with polished chrome finish and fitted with 5 litres/minute flow regulator.
Deck mounted spout with 110 mm throw with polished chrome finish and fitted with 5 litres/minute flow regulator.
