NBS Source
I'm a manufacturer

Degafloor Deep Fill Repair Mortar - Resin Flooring

Verified by manufacturer 15 days ago

Degafloor Ltd Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

  • BREEAM - Certification

    Certificate type

  • UK Conformity Assessed (UKCA)

    UK Conformity Assessed (UKCA)

    Certificate type

A repair mortar to fill and repair deep holes, based on quick curing MMA resin, hard wearing.

Jump to:
BIM object icon
+44 (0)1778 342545 Website

Application

Suitable for:

  • Professional use by approved and fully trained Degafloor installation partners only.
  • Both internal and external use and for low temperature areas.


Typical applications:

  • Rapid repair of deep holes and areas of substrate damage.
  • Repairs where substrate movement/ shrinkage may occur.
  • Repairs in environments subject to thermal cycling.
  • Drain, man hole and inspection cover installation.
  • Creating ramps and falls (shuttering may be required).

Description

Based on quick curing resin technology. Developed to fill and repair deep holes (from 5mm – 300 mm in depth in one layer). Offers greater flexibility than traditional rigid concrete repair mortars.


Features and benefits:

  • Cure time of less than one hour. Rapid installation, minimal disruption.
  • Bonds to most substrates and surfaces. Provides crack-free performance.
  • More flexible than traditional repair mortars.
  • Slump free placement.
  • Manufactured in accordance with ISO 9001:2008, ISO 14001:2004 and ISO 18001:2007 Quality and Management Systems. All resins comply with current EU hygiene and foodstuff regulations and are non-toxic.
  • Chemical resistance to acids, oils, alkalines, salts, cleaning agents and foodstuffs.

General information

Color

Grey

Finish

Textured

Smooth

Material

Resin

Quartz

Guidance for specification option:

 Fine quartz fillers.

Shape

Formless

Warranty description

Ten year

Uniclass

Pr_20_31_53_54 Mortar repair mortarPrimary

CAWS

C42/310 Repair mortar

Specification data - Mortar repair mortar

Colour

Grey.

Components

Manufacturer's standard.

Guidance for specification option:

  • Resin component – 25 kg containers and 190 kg steel drums.
  • Pre-formulated bulk mixes – 23 and 25 kg depending on the depth of repair.
  • Hardener – 100 g bags or 25 kg boxes.


Curing time

One hour.

Guidance for specification option:

Degafloor Deep Fill Repair Mortar cures fully within one hour of installation (both chemically and physically).


The cure time remains unaffected at temperatures down to 5°C, may also be installed at temperatures -20°C, with the addition of an accelerator.

Material

Resin and fine quartz fillers.

Preparation

-

Manufacturer guidance

All substrates must be clean, dry and free from contamination, i.e. dust, dirt, oil, laitance, curing compounds and other contaminants.

The substrate should be capable of accepting a resin finish and this is best achieved by mechanical means (shot blasting, planning or diamond grinding) although this may not always be possible due to the size and shape of the area to be repaired.


If surface preparation is not practical, please complete a bond test to check whether strong adhesion can be achieved.


The substrate should be primed using the appropriate Degafloor primer applied at approx. 0.4–0.5 kg per square metre.


When priming ensure any edges are also primed.

Storage

Below 25°C.

Guidance for specification option:

Protect against direct sunlight.

Third-party certification

To British Board of Agrément-certified (20/Q064).

Cleaning options

Guidance for specification option:

Cleaning equipment and products for all industrial and commercial floor maintenance. Consult manufacturer and insert requirements or omit:

  • Heavy Duty Wet Vacuum 30 Litre.
  • Heavy Duty Wet Vacuum 60 Litre.
  • Degafloor Eco-Clean.
  • The DegaWash Range.
  • Swift95.
  • The Maxey.
  • Emex.
  • Crusader.


Manufacturer guidance

Floor Cleaning Solutions.


See manufacturer literature 'DegaClean Cleaning & Maintenance Brochure'.

Sustainability data

Contains Red List materials

No

Country of material origin

Germany

Country of product manufacture

United Kingdom

BIM objects

BIM object icon

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit
-

1

IFC
-

1

Third party certifications

BBA Agrément Certificate

BBA Agrément Certificate

BBA ISO 9001 Certificate

BREEAM - Certification

BREEAM - Certification

FERFA BREEAM Statement

UK Conformity Assessed (UKCA)

UK Conformity Assessed (UKCA)

UK Certificate of Conformity of the Factory Production Control - UK 0836 CPR 22/F6564

Literature

Degaset Mortar and Screed

Degaset Mortar and Screed

Degafloor Deep Fill Repair Mortar

Degafloor Deep Fill Repair Mortar

BS EN ISO 9001 : 2015 Quality Management System

BS EN ISO 9001 : 2015 Quality Management System

Case studies

Degafloor Quartz Trowelled Aggregate - Long Clawson Dairy Resin Flooring

Degafloor Quartz Trowelled Aggregate - Long Clawson Dairy Resin Flooring

Degafloor QTA System - Swimming Pool & Changing Rooms - Resin Flooring

Degafloor QTA System - Swimming Pool & Changing Rooms - Resin Flooring