Curved Copings - Standard

Curved Copings - Standard

Select regional version:

Download

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Tags:

The Meridian Coping System is a secret fixed, low maintenance, aluminium coping system available in standard and bespoke profiles.

Fasteners/ installation:

Wind load conditions require the use of visible fasteners on copings installed more than 10 m above ground level. Where copings are to be used on masonry walls, because of the loadings transferred to the structure it is vital that the top courses of the masonry are tied in adequately. In addition, where uneven surfaces are to be capped, or where perforated bricks are utilized, 25 mm thick plywood must be adequately secured to the top of the wall prior to the installation of the coping system.

Platform Compatible Version Certified to
IFC IFC - 1 1.3
Revit Revit 2015 + 1 1.3

  • Properties and values
  • More information
  • More BIM objects

Properties and values

IFC
IfcExportAs
IfcBuildingElementProxyType
IfcExportType
USERDEFINED
COBie
NBS_General
NBS_Data
Accessories
Corners, Transitions, Junction, Stopends, Special items to be designed and manufactured specifically for the application
ColourOptions
www.dales-eaves.co.uk/​finishes
CopingType
Clip
EnvironmentalProductDeclaration
n/a
FinishOptions
Powder coating, Anodised, PVF2, Mill finish, Timber effect powder coating
FixingOptions
Secret fix: wall widths up to 500 mm, installed below 10 m; Mechanical fix: wall with widths above 500 mm and 10 m in height
Fixings
n/a
MaterialThicknessMinimum
Dependant on coping application
MaterialThicknessOptions
1.5 mm (Wall width 112-300 mm), 2.0 mm (Wall width 301-410 mm), 2.5 mm (Wall width over 410 mm)
Profile
Curved Copings
Pset_BuildingElementProxyCommon

More information

  • NBS specification data
    Case studies and technical literature
  • More BIM objects