NBS Source
I'm a manufacturer
Compare variants

Hydroduct® CF20

Verified by manufacturer over a year ago

Hydroduct® CF 08

GCP Applied Technologies Variant:
Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

High-density polyethylene combined cavity former and vapour barriers for drained BS 8102:2009 Type C basement construction.

Jump to:
BIM object icon
+44 (0)1753 490000 Website

Application

Suitable for the internal face of concrete floors and walls to form drained cavities horizontally and vertically.

Description

A range of high density, high strength, chemically resistant polyethylene drained cavity formers designed to reduce the risk of water ingress beneath floor screeds and between concrete and blockwork walls to form an efficiently drained cavity to new and existing sub-structures. When installed against the internal face of concrete floors and walls, Hydroduct® CF will provide a continuous drainage path that must link to the site internal drainage system. Not suitable for internal applications where no linking with the site drainage system is possible. Hydroduct® CF forms part of a Type C structure (drained protection) as described in BS 8102. The cavity formers are compatible with all cementitious, bituminous, and polyethylene building materials.


Hydroduct® CF 08 is designed to form drained cavities vertically in lower risk applications and Hydroduct® CF 20 is designed to form drained cavities horizontally and vertically.


Preparation:

Floor slabs should ideally be laid to falls to drainage gully or outlets. A flat slab is acceptable providing there are no adverse falls and low spots are infilled. Where surface irregularities exceed 5 mm, cut back and make good.


Fixing:


  • Vertical membranes should be installed before horizontal.
  • Vertical applications: Install in a continuous strip with dimples to the external wall. If horizontal laps are unavoidable, the upper sheet must be overlapped by the lower sheet, to ensure water is retained within the cavity.
  • Horizontal applications: Loose lay membrane with dimples to the floor and cut around any obstructions. Mechanically fix to substrate. Seal around column bases, obstructions, etc., by applying Hydroduct Strip 4000. Prime all substrates to receive Hydroduct Strip (other than CF membrane) with Bituthene® B1 primer to ensure full adhesion.


Fixing centres:

600 mm.


Sealing:

Seal all joints with Servitape double-sided adhesive tape. Seal all penetrations through with Servijoint One DW sealant.

General information

Color

Brown

Material

High density polyethylene (HDPE)

Shape

Rectangle

Length

20000 mm

Width

2000 mm

Uniclass

Pr_25_57_51_36 High-density polyethylene (PE-HD) studded sheetsPrimary

CAWS

J40/290 High-density polyethylene/ polypropylene studded cavity drain membrane

Specification data - High-density polyethylene (PE-HD) studded sheets

Third-party certification

British Board of Agrément (BBA) Certificate.

Stud height

8 mm.

Sheet thickness

0.6 mm.

Guidance for specification option:

Membrane thickness.

Colour

Brown.

Drainage capacity

2.25 L/s/m.

Guidance for specification option:

Designed to form drained cavities vertically in lower risk applications.

Joints

Overlap all vertical joints 150 mm (minimum).

Purpose

Cavity former and vapour barriers for drained BS 8102:2009 Type C basement construction.

Width (minimum)

2 m.

Roll length (minimum)

20 m.

Materials

High density polyethylene (HDPE).

BIM objects

BIM object icon

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit

Revit 2016

5

Third party certifications

BBA Agrément Certificate

BBA Agrément Certificate

13/5064